Depth gauge is not reading correctly
06-22-2004 | 06:03 PM
#1
Thread Starter
Registered
Joined: Jul 2001
Posts: 928
Likes: 0
From: Austin, TX
Depth gauge is not reading correctly
The depth gauge on my 38 lightning is turning on, but it only reads 1.9 to 2.2 feet regardless of the true depth. It is mounted to under the step going to the cabin on the port side of center. It looks like there is not anything but fiberglass hull. Any advise is appreciated.
Thread
Thread Starter
Forum
Replies
Last Post
handfulz28
Trucks, Trailers and Transportation
6
12-22-2007 09:08 PM
