I need help finding a prop for my '86 Schiada 22' Daycruiser. It has a blown BBC with a powerglide and early Speedmaster III (19 spline). Currently it has a 3 blade RH chopper that I've cracked both times I've had it out. Not sure of the pitch or size as the markings are nearly worn off.

I need some options!

-Does anyone know of any props for sale for this drive?

-I've read about hub conversions to allow use of outboard props. Anyone with experience with one?

-Any other options short of a Bravo I conversion?

I have 19 spline SSMIII props but I must sell them in pairs...

If you're interested PM me

Try calling Randy or Beth at Cobra Power.

305-893-5018.

Julie

Im interested if 4 blade 19 spline 30 pitch.

Gerry

Randy has a good selection, we also have a nice assortment. Need to have an idea as to what you have now, minus that how about the drive ratio, boat speed and max RPM?

your local prop shop should be able to tell you pitch etc.we have a large selection of used props in stock,give us a call @ 954-237-0332

I have a 18 x 30 RH three blade small shaft if interested. Bob 609-923-0631

I currently don't know the drive ratio. Currently the boat goes approx. 80mph at 5,000rpm. It is a relatively heavy (4,000 lbs) semi-V bottom.

http://schiada.com/Pages/Boats22.html

Thanks for the help!

Justin

I was able to purchase a pristine 16.75"x29.5" 4-blade for my SSM III from Doller Offshore for $800. They seem to have a few lying around.

I've got a pair of 15.75 x 26 three blades long hub with 19 spline. They are near perfect and have never been thinned.