24 Skater help
#1
Registered
Thread Starter
Join Date: Dec 2005
Location: Lanexa VA/St. Pete FL
Posts: 384
Likes: 0
Received 0 Likes
on
0 Posts
24 Skater help
Looking to pick some peoples brain about setup of a 24 w/ twin 280s. I was wondering if anybody had something close & what set back are you running if any at all. right now the motors are sittin on the transom but was thinking of installing jack plates. Is there any difference in handling. Also how high are you running your motors. Thanks in advance.
#4
Registered
Thread Starter
Join Date: Dec 2005
Location: Lanexa VA/St. Pete FL
Posts: 384
Likes: 0
Received 0 Likes
on
0 Posts
Re: 24 Skater help
Thanks for the help guys, after lookin I found some threads discussing all of my questions.
Ryan I gave you a call & left my # but never heard back from you, give me a call if you get a chance.
Ryan I gave you a call & left my # but never heard back from you, give me a call if you get a chance.
#5
Registered
Thread Starter
Join Date: Dec 2005
Location: Lanexa VA/St. Pete FL
Posts: 384
Likes: 0
Received 0 Likes
on
0 Posts
Re: 24 Skater help
Big Poppa- we will have to get together, I'm right down the road from you. I use to hang out on the rappahanock ALL the time, I still go back 1-2 times a year. I was up there for the radar run last year.