Offshoreonly.com

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   Skater (https://www.offshoreonly.com/forums/skater-42/)
-   -   Skater Full Cover (https://www.offshoreonly.com/forums/skater/174512-skater-full-cover.html)

offshoresteve 12-04-2007 05:25 PM


Originally Posted by Fast Franko (Post 2359099)
Carrie Covers has built a bunch of them-Should be able to pick out a color & have them send it out to you no problem

Yea, they made one for my 28 that looks like an " Afro hair net" said it could be left on while in the water,No holes for Cleats! called Carrie several time and finally gave up.Unless you like thowing away $ call some one else:(

Strip Poker 388 12-05-2007 12:50 AM

2 Attachment(s)

Originally Posted by Pro1 (Post 2359273)
I have the other straps too. The trailer business was a dealer for MR products.


Yea I like the MR tie downs. I would of thought they would of used the stronger snap hook style,Ive seen the S hooks pull loose just riding down the road on a buddies 29 Donzi.

plumbers crack 12-10-2007 06:38 PM


Originally Posted by Strip Poker 388 (Post 2359846)
Yea I like the MR tie downs. I would of thought they would of used the stronger snap hook style,Ive seen the S hooks pull loose just riding down the road on a buddies 29 Donzi.

Where do the barrels connect to in the picture ? where can I get them and are they strong? I need 6 for the skater.

Strip Poker 388 12-10-2007 11:40 PM

1 Attachment(s)
The MR S hook style says it for motorcycles ,rated at 2500lbs
http://www.mrproducts.com/index.php?...294&cookie=yes



Car style with snap hook is rated at 5k
http://www.mrproducts.com/index.php?...=70&cookie=yes

I have a set of the MR same as the boat tie down for my race car, Also a set for the Chevelle with axle straps

You can order it with the twist direct bolt style, like above picks .I have the on my Transom, Ratched end on the trailer.

http://www.etrailer.com/Merchant2/gr...19_ratchet.jpg

http://www.etrailer.com/y-248.aspx

CK the ratings on them
http://www.brandsonsale.com/ht-001015.html


S line make some pretty good stuff also,there showing a higher strength.bet there the same though
http://www.s-line.com/Products/cartiedown.htm


I wish they made the ratches and hooks out of stainless,After about 3 years the ratchet has these water spot looking spots on them:(


Hope this helps:D

SkaterWearLine 12-11-2007 01:19 PM

We make custom Skater covers. I can have one designed in mulitple colors or just one color. We typically use Aqualan versus Sunbrella. But we will be able to work with whatever material you prefer. I will check with my boss and see if he can get me an estimate - we completed his '28 Skater Cover and it is great!

SkaterWearLine 12-11-2007 01:21 PM

to add to my above comment... we would most likely need your boat to get the best fit for the cover possible.

Xchoke03 02-08-2008 08:35 PM

Pro1 suggested Gioia Sails to me for my cover and DAMN did he hook me up. These are awesome people with a great product, they give you total custom at a great price.

Thanks Pro I owe you a cold one for SURE !!!


All times are GMT -5. The time now is 06:40 AM.


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.