Resto Pics Of My 32 Skater
10-24-2008, 12:37 AM
#41
Registered
Thread Starter
Join Date: Mar 2005
Posts: 604
Likes: 0
Received 0 Likes
on
0 Posts
more pics , before and after. Upper right before, other two after . I know I'm ****ed up , but I think it looks cleaner
Larry
Larry
Last edited by activatorf1; 10-24-2008 at 12:39 AM.
10-24-2008, 08:36 AM
#43
Registered
Thread Starter
Join Date: Mar 2005
Posts: 604
Likes: 0
Received 0 Likes
on
0 Posts
I spent a great deal of time doing that , but after seeing your old boat , I'm doing away with that . If you remember your Transom , you did not have a well , it was just flat across, it is more work , but worth it
Larry
Larry
10-26-2008, 01:12 AM
#45
Registered
Thread Starter
Join Date: Mar 2005
Posts: 604
Likes: 0
Received 0 Likes
on
0 Posts
Not sure what you mean but these pics should clear things up . I made two molds to lay up two parts for the transom , they are to fill in the well .
Spray mold with PVA
spray gelcoat
one layer 3/4 once
2 layer fab mat
2 layer 1.5 once
My buddy Ken Borrelli owns New wave Marine in Deptford NJ ( NUWAVEPARTS.COM) one of the Largest Merc dealers . Also repairs and builds boats . I was out of Vinylester resin so I layed them @ his place
Larry
Larry
Spray mold with PVA
spray gelcoat
one layer 3/4 once
2 layer fab mat
2 layer 1.5 once
My buddy Ken Borrelli owns New wave Marine in Deptford NJ ( NUWAVEPARTS.COM) one of the Largest Merc dealers . Also repairs and builds boats . I was out of Vinylester resin so I layed them @ his place
Larry
Larry
Last edited by activatorf1; 10-26-2008 at 01:34 AM.
Racer
Boat looks like shes coming along nice 
