Will do, mine are the older style tho, not nearly as nice as some posted here. Mine look the exact same as the white maroon and gray set posted by my00b16si.

Thanks for the pics ! Do you have pics of high back rear seat shell ?I take most of the holes are to lighten it up? Also is that star board , and how thick ,1/2 ? I need to know how much foam is added to the shell so I can take that consideration in my design.

Larry

my00b16si Are you in the interior business ??

yes

Ppi ?

I spoke to Jim last week about int on my 32 Skater , please call me I have a few Questions before I build my rear seat frame . I also have a friend who has been in the boat building business for other MFG for many years , now we are Mfg our own boat , the hull is done and we just made the deck plug and I showed him a sample of your work and he wants to bring boat down to you from NJ when the deck is on so you can work your majic . We want to be able to just order an Int as we build them .

Larry @ 609-315-2640

no problem!

Jim called me and I'm very clear on how to build the seat frame . One queston, how thick is the foam where your ass sits and also how thick where you would lean into ? I need to figure this into my design so I can have my desired ride height for the poor jackass that gets to ride in the rear seat . You can E-mail me at [email protected]

Larry

I will send them to you tomorrow via e-mail

Thanks ! My e-mail is [email protected]


Larry