Skater Logo ???
06-30-2009 | 01:58 PM
#482
Neno the mind boggler
Joined: Sep 2001
Posts: 13,080
Likes: 320
From: toledo oh
holy cow! . . . this thread fell to #2! . . . man thats alot of parts on the garage floor . . . almost as many as mine 
__________________
Throttles- Cleveland Construction 377 Talon
08 OPA Class 1 National Champion
08 Class 1 Geico Triple Crown Champion
08 OPA High Points Champion
10 OPA Class 1 National Champion ( happy now Ed! )
Throttles- Cleveland Construction 377 Talon
08 OPA Class 1 National Champion
08 Class 1 Geico Triple Crown Champion
08 OPA High Points Champion
10 OPA Class 1 National Champion ( happy now Ed! )
06-30-2009 | 05:10 PM
#483
Thread Starter
Banned
Joined: Sep 2007
Posts: 12,849
Likes: 3
From: Frankfort,ill
07-08-2009 | 10:49 AM
#486
Thread Starter
Banned
Joined: Sep 2007
Posts: 12,849
Likes: 3
From: Frankfort,ill
Super Dave is the man if i can just get him to finish the deck while she's laid up for another few weeks 
hate to have to send it down to the Bayou 
OMG !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
07-08-2009 | 03:44 PM
#487
Registered
Joined: Feb 2003
Posts: 1,517
Likes: 0
From: bluffton sc
Listen that guy dave is not well upstairs.
spray your own boat 101 sand with 80 grit,6 coats primer surfacer,wet sand with 600, apply adhesion promoter,spray paint(krylon) according to the the directions on can,and then apply clear coat(krylon)
It is important not to mix the types of paint products ! if it runs just hit it with the heat gun wet sand and buff.
Done next project....
spray your own boat 101 sand with 80 grit,6 coats primer surfacer,wet sand with 600, apply adhesion promoter,spray paint(krylon) according to the the directions on can,and then apply clear coat(krylon)
It is important not to mix the types of paint products ! if it runs just hit it with the heat gun wet sand and buff.
Done next project....
07-08-2009 | 08:07 PM
#488
Thread Starter
Banned
Joined: Sep 2007
Posts: 12,849
Likes: 3
From: Frankfort,ill
07-09-2009 | 10:29 AM
#489
Neno the mind boggler
Joined: Sep 2001
Posts: 13,080
Likes: 320
From: toledo oh
Listen that guy dave is not well upstairs.
spray your own boat 101 sand with 80 grit,6 coats primer surfacer,wet sand with 600, apply adhesion promoter,spray paint(krylon) according to the the directions on can,and then apply clear coat(krylon)
It is important not to mix the types of paint products ! if it runs just hit it with the heat gun wet sand and buff.
Done next project....
spray your own boat 101 sand with 80 grit,6 coats primer surfacer,wet sand with 600, apply adhesion promoter,spray paint(krylon) according to the the directions on can,and then apply clear coat(krylon)
It is important not to mix the types of paint products ! if it runs just hit it with the heat gun wet sand and buff.
Done next project....
Hows it going Ryan, boat looks good. I have a 36 in the shop right now. Man what a bad ass boat, cant believe how big the are for a 36
__________________
Throttles- Cleveland Construction 377 Talon
08 OPA Class 1 National Champion
08 Class 1 Geico Triple Crown Champion
08 OPA High Points Champion
10 OPA Class 1 National Champion ( happy now Ed! )
Throttles- Cleveland Construction 377 Talon
08 OPA Class 1 National Champion
08 Class 1 Geico Triple Crown Champion
08 OPA High Points Champion
10 OPA Class 1 National Champion ( happy now Ed! )
Last edited by glassdave; 07-09-2009 at 10:31 AM.
07-09-2009 | 11:27 AM
#490
Thread Starter
Banned
Joined: Sep 2007
Posts: 12,849
Likes: 3
From: Frankfort,ill
Listen that guy dave is not well upstairs.
spray your own boat 101 sand with 80 grit,6 coats primer surfacer,wet sand with 600, apply adhesion promoter,spray paint(krylon) according to the the directions on can,and then apply clear coat(krylon)
It is important not to mix the types of paint products ! if it runs just hit it with the heat gun wet sand and buff.
Done next project....
spray your own boat 101 sand with 80 grit,6 coats primer surfacer,wet sand with 600, apply adhesion promoter,spray paint(krylon) according to the the directions on can,and then apply clear coat(krylon)
It is important not to mix the types of paint products ! if it runs just hit it with the heat gun wet sand and buff.
Done next project....
Listen that guy dave is not well upstairs!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!.:cool cowboy:
I hear ya BIG Daddy dont know if we should blame it on the Paint & glass fumes,The Ludes,the bump on his head from the stripper pole incident
or just a wacky Custom Painter LMAODayum Dave has all the fun
Last edited by RunninHotRacing163.1; 07-09-2009 at 11:30 AM. Reason: Forgot the Blonde canvas
