Believe me the modification was done to peters specs and professionally. If you would like photos or specifications I'd be happy to share them

It would be greatly appreciated

Yes it would!!!

I'd be happy to share some pics if someone can tell me how to post them.

Paul ,
would you please post a couple of your quad setup. I would like to see the rigging. I have a twin outboard Talon I am toying with adding a third motor. The 32A with outboards, in my opinion is the schnizzle! We met briefly at the 03 Worlds. I was on the Harley with my g-friend. You and Gary got us in the pits with the bike. Good luck racing! Bob

I don't know it worked with quad 2.5's but it sure looked bad azz. Doug

Bob
No problem, hope to see you at the worlds again!.. If you forward me your e-mail I'll send what pics I have of the quad setup.

Doug
The Boat with quads was great on a large lake or bay but not in the ocean. Below 82mph the two center engines acted as a dam and prevented the air in the tunnel from passing, something you could really feel. Above 82 the air would finally blow through and the boat would start packing and the acceleration would set you back. All that being said the current set-up with the twin 300xs's is a much much better boat and worlds more enjoyable. When an 18 time champion says it is " the most forgiving boat" he's ever been in then I guess we went in the right direction

Paul,
I would sure appreciate knowing your prop diameter and pitch when you were running the quad set up.
Also, engine height and what direction did you turn the props to get best top speed.
Thanks

David
I turned 15x32 3 blades.. center motors had inward rotation and outside motors had outward rotation. The outside motors were 1 1\4 up and the centers were 5\8 higher. Actually an odd setup as one would think the centers would be much higher.. If someone can tell me how to post a picture I'll post a few

Paul

Paul-

Send the pictures to [email protected] and I can post them

Don