|
Steve are you turning your motors in or out? What RPM are you turning at 116mph?
|
Originally Posted by offshoresteve
(Post 4122542)
Noli, Shaun installed a modified exhaust tuner, light weight flywheel, water crossover system so I don't lose water pressure in turns, installed a water dump on the side of the bottom pan of cowling(helps keep water spray off the motor) When I first went to Shaun, my cruising speed @5000 was 80mph and my WOT was 105mph.......after Shaun cruising @5000. 90mph. ....and WOT is 116mph. ......"Maritime eng" OSO member was on board for the run........Shaun said out of the all the 28Skater he has worked on or driving. ..my hull is the fastest...
My experience with Shaun was Class Act....... Steve is 100% correct that I was onboard during the setup runs. It was very impressive to see the differences in the before and after runs with this boat. Shaun is a friend of mine and has also helped me on my boat and the results have been very good. I have and will continue to stay out of this discussion because it is none of my business....... |
Originally Posted by Double Rigged
(Post 4122549)
Steve are you turning your motors in or out? What RPM are you turning at 116mph?
|
Turning in. ...Dewald props....rpm @ 116 is 6400-6450, Readout is from my Sc5000screen.....
|
Originally Posted by LAriverratt
(Post 4122360)
what would be really nice is if all us outboard guys could make it to loto one year! I may be able to do it next year but this year there's just way too much cr@p on the calendar already (don't tell my wife I called it cr@p :crazy:)
|
Originally Posted by da*****rcury
(Post 4122647)
I'm registered for this year. The wife and I are really looking forward to it
|
As soon as I get the one power head back from diamond, I'll be set with the engine work. Just drop on.
I'm going ahead with shipping the 3 original sportmasters to Craig colabella performance for rebuilds |
David
Sorry for all of us to hijack your thread with all this other stuff and get sidetracked!!!! Hope you get your boat back together soon. Let's move this BS stuff to Craig's new thread where it belongs! Carry on. |
Originally Posted by Double Rigged
(Post 4122749)
David
Sorry for all of us to hijack your thread with all this other stuff and get sidetracked!!!! Hope you get your boat back together soon. Let's move this BS stuff to Craig's new thread where it belongs! Carry on. |
Originally Posted by da*****rcury
(Post 4122666)
As soon as I get the one power head back from diamond, I'll be set with the engine work. Just drop on.
I'm going ahead with shipping the 3 original sportmasters to Craig colabella performance for rebuilds |
| All times are GMT -5. The time now is 12:16 PM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.