Correct, I have the option on the screens, however it doesn't work. I set the trim by all the way down, hit set, then go all the way up, then hit set, etc. I could have that backward but it is programmed some thing like that.

Ill have it trimmed all the way in and it will show, for example 5/even/level, like it isn't hooked up. Or trimmed out and will show 5 still. wacky readings. All my connections are connectors vs spliced wires so didn't think 300xs had a trim output. Now I know otherwise and wondering why mine don't work.

Any idea what color wires trim outputs are and what voltage they should be putting out? Like how do I check where I am losing the signal at.

Thanks!!!

Order a set of these and keep you attention straight ahead , not viewing a TV screen .

2 Track kit including 2 Outboard actuators , Teflon lined cables and thru hull fittings . Everything in one kit 799.00 . Stainless marine 1280