28 skater windshield
#142
Registered
VIP Member
Join Date: Jun 2008
Location: long island ny
Posts: 240
Likes: 0
Received 0 Likes
on
0 Posts
#144
Registered
Join Date: Feb 2010
Posts: 974
Likes: 0
Received 0 Likes
on
0 Posts
You 28 owners that want a windshield that you see thru and not a fairing need to get in touch with Dave Bush ( DBR Racing ) his father made a very nice W/S that had aluminum corners . Very good looking part
Larry
Larry
#145
Registered
Join Date: Jun 2007
Location: Amityville, NY
Posts: 114
Likes: 0
Received 0 Likes
on
0 Posts
I dont know if you guys have priced custom curved glass lately but even a small corner piece for a 24' boat runs about $5k. That is what I had to pay after a storm to have one little section custom made.
A full wrap around one? if it were under $20k just for the glass I would be shocked, then you still need framework to hold it onto the boat.
Curved lexan would be a lot more reasonable
A full wrap around one? if it were under $20k just for the glass I would be shocked, then you still need framework to hold it onto the boat.
Curved lexan would be a lot more reasonable
#149
Registered
Thread Starter
It was Joes father that built the aluminum pieces. I have spoken to him about it but last conversation was he was going to see if he could or wanted to make more. Joe works with Dave Bush. I can call and see where he s with it. He also owns the all white triple eng 28 that was for sale. I believe he still has it. Great guy!
#150
Platinum Member
Platinum Member
It was Joes father that built the aluminum pieces. I have spoken to him about it but last conversation was he was going to see if he could or wanted to make more. Joe works with Dave Bush. I can call and see where he s with it. He also owns the all white triple eng 28 that was for sale. I believe he still has it. Great guy!
Last edited by LAriverratt; 09-25-2012 at 06:57 AM.