.

Congrats on the new boat. Looks huge for a 30!



Double-R, please send me the info to buy the shaft seals.

What happens if you don't have the special shaft seals? Does water intrusion occur in the lowers?

Hay congrats on the boat you will love it 4blade is definetly easer on the lowers which is the weak link on those motors good luck with it

I do need a gps. Size will be an issue I'm limited on space where I want to mount it

I'll pull lowers ASAP to see what I have.

I had issues with water intrusion on mine before the mods. The gear case on a cat especially the optis get hot when running hard for extended time. The case builds pressure thus the catch tank on the shift shaft. Works just like the ones on stern drives. Keeps from pushing seals out. Once that happens when it cools it sucks in water. The wayne Taylor shaft seals have 4 seals to the one seal that is stock. I also had TNT here in s fl add a 3rd prop shaft seal. I change gear case oil about every 20 hours. No water issues. However I did snap a drive shaft on my L/H one.
I will ge
Noli I will get info tomorrow and post it.

.


Thanks Double-R

That makes sense, water intrusion occurring during the cooling down.

looking for some bow pics (looking down) to get some ideas for the wrap. I looked through just about all the skater pic thread but only found a few. any help would be much appreciated.

Send me your email I have a bow shot.

Also call me tomorrow. I have a break at 1 CST

Double Rigged, How did you get the "Skater" logo on the Garmin/ I have a Garmin GPSMAP 720. Is it possible it make that model display the logo?

stereo and LED lighting should be done today...off to get a few chips in gel touched up, buff out...then new wrap.

Own an electronics company and we are a Garmin Dealer. It was a favor from one of the engineers. I do not think that it will work as the software was for the 5000 series units. I will however check just in case.
Sorry