|
double and triple check the core in the bottom if you havent already done so, be a shame for it to show up after all that work
|
2 Attachment(s)
[ATTACH=CONFIG]519422[/ATTACH][ATTACH=CONFIG]519423[/ATTACH]
Double Rigged, its in Hialeah right beside where my Renegade is being built, i'll send you Richy's number and you can go see it. Maybe you can confirm my questions abot the vessel view/300x working and wether a gateway will work with these motors and the Garmin I bought from you. Here are pics of the plugs and the Smartcraft gauges that were in the boat. |
Originally Posted by Maritime_Eng
(Post 4081955)
Eric- Sweet boat! Bring it donw to cape coral when you are done!
What year 300x? The last year of the 300x was compatible with smartcraft. |
sounds like it's going to be a real nice 28. looking forward to following your progress on it.
|
Erik,
I will check with my guys at TNT in Miami and let you know. The plug is definitely a smartcraft buss style plug. Does that come from a connecting block or the motor/motor harness? |
Not sure, I'll get Richy to check.
|
1 Attachment(s)
Day 2, sanding and rub rail removal and smoothing[ATTACH=CONFIG]519494[/ATTACH]
|
1 Attachment(s)
[ATTACH=CONFIG]519495[/ATTACH][ATTACH=CONFIG]519495[/ATTACH]
|
1 Attachment(s)
[ATTACH=CONFIG]519496[/ATTACH]
|
3 Attachment(s)
Hi , Eric. You might as well put the windshield on it while undergoing the makeover. Look at the one on Ron's boat next to mine.
I have one on order now. The no rubrail will be beautiful |
| All times are GMT -5. The time now is 03:49 PM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.