RobF

double and triple check the core in the bottom if you havent already done so, be a shame for it to show up after all that work

erik1976

[ATTACH=CONFIG]519422[/ATTACH][ATTACH=CONFIG]519423[/ATTACH]

Double Rigged, its in Hialeah right beside where my Renegade is being built, i'll send you Richy's number and you can go see it. Maybe you can confirm my questions abot the vessel view/300x working and wether a gateway will work with these motors and the Garmin I bought from you. Here are pics of the plugs and the Smartcraft gauges that were in the boat.

erik1976

Motors are still in Canada, if i brought it over this year youd have to tow me around haha

LAriverratt

sounds like it's going to be a real nice 28. looking forward to following your progress on it.

Double Rigged

iTrader: (1)

Erik,
I will check with my guys at TNT in Miami and let you know. The plug is definitely a smartcraft buss style plug. Does that come from a connecting block or the motor/motor harness?

erik1976

Not sure, I'll get Richy to check.

erik1976

Day 2, sanding and rub rail removal and smoothing[ATTACH=CONFIG]519494[/ATTACH]

erik1976

[ATTACH=CONFIG]519495[/ATTACH][ATTACH=CONFIG]519495[/ATTACH]

erik1976

[ATTACH=CONFIG]519496[/ATTACH]

Zero Patience

Hi , Eric. You might as well put the windshield on it while undergoing the makeover. Look at the one on Ron's boat next to mine.
I have one on order now. The no rubrail will be beautiful