![]() |
how do you guys get the pics to post full screen?
|
.
how to post big pics click the drop-down menu upper right corner and click on User Control Panel http://i1238.photobucket.com/albums/.../do_this_1.jpg click Edit Options http://i1238.photobucket.com/albums/.../do_this_2.jpg make sure the box is not checked http://i1238.photobucket.com/albums/.../do_this_3.jpg follow these instructions http://i1238.photobucket.com/albums/...orums/ins1.jpg http://i1238.photobucket.com/albums/...orums/ins2.jpg http://i1238.photobucket.com/albums/...orums/ins3.jpg hot to post multiple pics inside 1 post http://i1238.photobucket.com/albums/...orums/ins4.jpg |
I've replace the trim multiple times and it's a PIA. Usually has a rubber hose or tubing or foam to pad the sharp front edge covered with matching vinyl backed with thin foam rubber. The holes on the dash are from rivets holding a lead 1/2" bar over the trim to the dash on the front. Take excess vinyl up over bar and foam/rubber down over the hose to the back of the dash. Then rivet or screw the back side of dash being careful to not wrinkle as you go. The corners are the most fun! I used aluminum angle or plate to replace the lead. It gives a straighter finish line. I also intially tack the plate with screws on either end then rivet the rest on the front. When drilling holes for rivets or screwing vinyl on the back side of dash be sure to put a stop on drill bits and check your dash thickness especially where wood stops unless you are really good at gel coat repairs. Don't ask how I know that. It's especially fun for an old fat guy laying on your back. Allow plenty of time and have plenty of beer. I think it was posted on my 308 thread but not sure. I'll see if I have some photos.
|
Great now no upload of images! Why are we still paying for this site?
|
|
Nice Skater! You could use a windshield, though. :boat:
|
Nice attitude running shot. Also agree with David. Windshields are a must
|
That's a great looking 28! I agree nice angle of attack!! What year is it?
|
2000 hull and 2012 Motors
|
Hey guys I started a Facebook page called (Outboard Skater Powerboats). Join up and lets add some content, if anyone wants to be a part of it let me know and ill add you as a moderator.
|
| All times are GMT -5. The time now is 08:10 AM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.