Offshoreonly.com

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   Skater (https://www.offshoreonly.com/forums/skater-42/)
-   -   Outboard skater BS thread! (https://www.offshoreonly.com/forums/skater/312322-outboard-skater-bs-thread.html)

skate 05-28-2014 04:51 PM


Originally Posted by LAriverratt (Post 4128872)
looks like I should check with herring and dewald...not as bad a price on the herrings as I was thinking.

skate...three blade 14 1/2 x 32's

Craig

We need to get together and see if we can get a better price if we buy together. I still haven't made up my mind what to buy. I need to re read Franks (AppSysCon) post on his 308 prop test. He tested five or more props.

Unfortunately time to do research is not a luxury I have right now.

Sam

Double Rigged 05-28-2014 09:09 PM

I tried the Dewald five blade thru-hull cleavers also. I did not like how my boat handled with them at low rpm. They were not as fast as my 4 blade over the hub cleavers. Regarding Mercury props I have not found a set that would out perform Dewalds.
Tough call on the round ears. Gary had some 6 blades on the 32' wide body skater and the boat ran good. Also KAP ran that style I believe when he set the record in the Doug Wright 115mph. If you order them you had better get 4 ventilator holes in them. I have a little trouble with my 29 Herrings that are 4 blades with 2 holes in them getting the motors to come alive for the first 5 seconds or so. I have run 104 with them 1/2 tank fuel. They are great at slow speeds no slippage.

LAriverratt 05-29-2014 05:47 AM

Good info Ron, Thanks!!! Really would like to be able to run at lower rpms without the high prop slip. Sounds like Something Sam really has no need for huh LOL... wonder how the herrings do on that?
Sam, I'll try and get with you today...at least by middle of next week... hopefully have some kinda lowers back on one way or another by then LOL.

noli 06-01-2014 07:21 AM


Originally Posted by Maritime_Eng (Post 4128858)
On my 30 DW I am running 14.50" X 32p 5 Blade Thru Hub/ Cleaver Tip props. Runs 107 @ 6100 rpm.

I had a set of Dewald 14.25 x 33p 5 Blade Thru Hub Cleavers and ran 108 @ 6150 RPM




.



Don,

Can you take a pic of your prop and share here, just to be sure we have the right style image of the thru-hub cleavers.


How much does your prop cost each?

noli 06-01-2014 07:33 AM

.

Uh oh, new pricing structure for the race-style cleavers. the price I quoted [$3,600] was for round-ear Herings

http://i1238.photobucket.com/albums/...s-page-img.jpg

Maritime_Eng 06-01-2014 08:55 AM

You have the right picture. But instead of the round ear mine are pointy tip (cleaver style).

noli 06-01-2014 04:30 PM


Originally Posted by Maritime_Eng (Post 4130786)
You have the right picture. But instead of the round ear mine are pointy tip (cleaver style).

.


Don,

What is the gear ratio of your lowers?




.

Maritime_Eng 06-01-2014 06:52 PM


Originally Posted by noli (Post 4130931)
.


Don,

What is the gear ratio of your lowers?

.

1.62

Double Rigged 06-05-2014 06:27 AM

2 Attachment(s)
Need some pics to add to the BS Thread! Motivation for all you guys up north....
FL Keys a couple of weekends ago.

bulletbob 06-05-2014 07:24 AM


Originally Posted by Double Rigged (Post 4133020)
Need some pics to add to the BS Thread! Motivation for all you guys up north....
FL Keys a couple of weekends ago.

Keep'em commin DR. I will be back on the water either this evening or 2morow after hitting a log at 80+ and destroying a Sportmaster case.


All times are GMT -5. The time now is 06:38 AM.


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.