Who has Skater parts?
#1
Registered
Platinum Member
Thread Starter
Join Date: Dec 2013
Location: East Texas Waterfront- running errands if anyone asks
Posts: 903
Likes: 0
Received 1 Like
on
1 Post
Who has Skater parts?
Anyone have any spare parts sitting around in their shop. Here is a basic list. I will add as I progress.
Smartcraft displays.( I think Im going with the small square units.)
Skater bucket seats or similar.
Rear seat.
Rear hatch
Console.
In control split foot throttles that work with the hand controls. (Or similar)
Windscreens.
Custom steering wheel. Whatcha got?
Pop up cleats.
Pop up bow light.
Dewald 4b 34's
Smartcraft displays.( I think Im going with the small square units.)
Skater bucket seats or similar.
Rear seat.
Rear hatch
Console.
In control split foot throttles that work with the hand controls. (Or similar)
Windscreens.
Custom steering wheel. Whatcha got?
Pop up cleats.
Pop up bow light.
Dewald 4b 34's
Last edited by Flightplan; 03-14-2015 at 09:44 PM.
#2
Platinum Member
Platinum Member
I've got the roll over front light that came on a 28 Skater.
I have 4) pop-up cleats that have been ground flat and blasted for paint or powder coat, with backup plates.
I also have the rear hatch hinges and the hood pins/plates for same.
NP
I have 4) pop-up cleats that have been ground flat and blasted for paint or powder coat, with backup plates.
I also have the rear hatch hinges and the hood pins/plates for same.
NP
#5
Registered
[ATTACH=CONFIG]538562[/ATTACH][ATTACH=CONFIG]538563[/ATTACH]
I have the In Control split foot throttle that works together with the hand controls in the 32. I am taking it out.
I have the In Control split foot throttle that works together with the hand controls in the 32. I am taking it out.
Last edited by thedonz; 03-15-2015 at 03:43 PM.
#7
Registered
Platinum Member
Thread Starter
Join Date: Dec 2013
Location: East Texas Waterfront- running errands if anyone asks
Posts: 903
Likes: 0
Received 1 Like
on
1 Post
I really like the way that one mounts. Would it come with the cables and adapter to link it to hand controls? I would like to see how it rigs as well.
#9
I also have a VV race addition and a smaller Garmin GPS ready to go. Ron double rigged knows how to get the two 300X's to talk to it.
#10
Registered
Platinum Member
Thread Starter
Join Date: Dec 2013
Location: East Texas Waterfront- running errands if anyone asks
Posts: 903
Likes: 0
Received 1 Like
on
1 Post
Let me know which Garmin you have Sam.i might want it. I won't have room for a VV and a GPS. Keeping my analog dash. Might install the small Smartcraft gauges since its a plug and play.