We will be doing one for sure. That is sort of why i started this one.

Just an update and teaser. Boat is on its way home to NC. Pictures to come as soon as Bob sends them!
Time to get ready to get to work!

A few pics from the other day! Boat is home in NC
[ATTACH=CONFIG]566864[/ATTACH]
[ATTACH=CONFIG]566867[/ATTACH]

So cool to have a blank canvas on a 28 Skater today!!:ernaehrung004:

that paint will be beautiful on the water and on the trailer....

Here are two new 300x's being unboxed and disassembled getting ready for the 15" mids arriving this week. If any of you guys need Brand New mids let me know.

Sorry for the orientation on the pics. Never can get this IPAD to post right🙃🙁

Also progress on some hardware. Both set backs and helm installed. Boat is getting 2ea 8" Garmin displays port and stbd and 1ea 12" in the middle. Units on the way!
[ATTACH=CONFIG]567449[/ATTACH]

The new 15" mids that we acquired through Todd D are awesome. Based on his recommendation we had them painted via a 3 step process through a company in Cape Canavernal. Could not have asked for a nicer piece.
Assembly to start soon. Hopefully the bolt kits come soon.
[ATTACH=CONFIG]567510[/ATTACH]

Work continues on the mids. Not exactly a perfect fit. After cutting the tuners and starting to assemble some minor grinding to the casting had to be done to allow things to fit. Also found holes for attaching exhaust plate to mid not same depth as factory ones. Stock bolts were 1/8" too long.

New Latham wing plates, studs installed for lower units Still waiting on the yokes to arrive to be able to complete c clamps and install on transom. Mids ready to go. Time to cut shift shafts and have lower units modified.
Powerheads going on soon.
Boat heading to FL for rigging mid month if Bob does his part!!!!!!