32 Skater Project AKA Beat Dad
 

Well... here goes

Been boating all my life and I cant get enough of it. I remember going to races as a kid growing up and watching my dad fly by! Just cant get enough of it. So I bought my first boat when I was 16 - a 23' Powerplay Conquest. Had a blast with a bunch of friends and figured why not go faster and bigger. A few years later I bought a 32' Velocity with some 454 mags. That was fun too! A real drivers boat - especially on Lake Michigan. My father had a 35 Fountain and the velocity out ran it by a few MPH. He ended up with a 42 Tiger and I was left far behind. He found a sweet deal on a 40' Classic Skater and snatched it up. I have never had as much fun on the water. After the first ride and driving the boat i started hunting for a cat. Went to Florida to look at a 39 ocean express that ended up having a hurt motor and a wet hull (was a great trip glad we flew all the way down there...NOT). A few months later at lunch my father showed me a 32 Skater on Ebay and I went and looked at it the next day and bought it!


The day I looked at it

Bringing it home

Its pretty cool how you can see traffic behind you while towing the boat! LOL



So I am not sure why the original trailer was ever modified... No need for dually tri axles at all. The brakes were out dated and I was unable to find parts anywhere for them and I didnt want to end up on a long trip some where and end up on the side of the road - Also one of the axles was bent. I drove down to Skater and discussed some options and what they run on their new trailers with Pete and settled on some 7K lb torsions.

Took the boat off the trailer





And then started hacking apart the wagon



It was time for the axles to go!




Added a drive guard on the ass end (This will change before paint once the other drives show up)


The trip to Florida was not a total waste of time! I found a 40' Classic Skater in Clearwater that needed too much love and care that I was willing to put into it at the time. Looking back I should have snatched it up. Anyways - The guy with the 40' Skate also has a bunch of other cool boats down there and tons of parts! He showed us some old merc 700's in a crate. On the way home with my 32 I called my father to shoot the **** a bit and he threw the idea of "Hey why not give Ralph a call and see if hes still got those motors!?" A few days later they were on their way.

Added some steps

And some axles

If you look closely in this pic you can see where the tongue and the trailer meet there is bondo that i had ground down. I found that there was a 4X5" rectangular tube welded to a 4X3" rectangular tube to achieve a 4X8" rectangular tube mess that is the tongue.....Not my style

Replaced the tongue and received some wheels in the mail. Quick trip to a buddies shop and had the rubber mounted on the rim and then onto the trailer they went

Thanks Al! I am working on trying to find a better way to post pictures - I'm no computer genius. It is a 5 man cockpit steering on the starboard side nothing special. I have dipped a motor in it a couple of times to get an idea on where they need to land and have modified the motor mounts but they may change again. The boat has IMCO boxes / 1.36 Bravos and I think its time they go. My father sometimes calls me "Stone hands" and I feel like it would only be a matter of time before the Bravos and I disagree. That being said if anyone is looking for or knows someone who needs a whole transom set up give me a PM or phone call. 616405406four

Congratulations, Nice ride..!!! Thats quite the trailer a 3 axle dually!!!

Wow sitting like a monster truck lol. What are you plans for drives . Hope the bravos live?

Lots of #6 stuff for sale these days.. thats the route id go.