Best props for '98 42 with 500 HP's?
08-22-2007, 10:06 PM
#1
Registered
Thread Starter
Join Date: Jan 2005
Location: Kingston, Ont., 1000 Islands
Posts: 179
Likes: 0
Received 0 Likes
on
0 Posts
Best props for '98 42 with 500 HP's?
Any 42 owners using 5 blade Maximus, or should I stick with the B1's?
I just did an engine refresh and the builder said he could turn the B1 24's to 5600 at 70 MPH. I am not sure what if any work was done on the 24's.
Should I just get a set of 26's or look at the Maximus?
I just did an engine refresh and the builder said he could turn the B1 24's to 5600 at 70 MPH. I am not sure what if any work was done on the 24's.
Should I just get a set of 26's or look at the Maximus?
08-23-2007, 12:29 PM
#2
Charter Member #37 /Moderator/Platinum Member
Charter Member
I have a 1997 42 with 500 carbs rebuilds. We run 26's. With lite fuel we run a honest 73. We are only turning 5100rpm though. In my opinion a labbed 25 is what works best. I have not tested that just could not justify the money . Good Luck.
David
David
__________________
Champagne taste on a beer Budget
C. P. B. A. Carolina Power Boat Assoc
Champagne taste on a beer Budget
C. P. B. A. Carolina Power Boat Assoc
08-23-2007, 11:07 PM
#3
Registered
Thread Starter
Join Date: Jan 2005
Location: Kingston, Ont., 1000 Islands
Posts: 179
Likes: 0
Received 0 Likes
on
0 Posts
25's would be 3 blades. I have a set of 25 Mirage + I kept from my 292SR1 Formula.
I don't think I could get the beast to plane with them, but I could strap them on and try!
My engine builder thinks 26 B1's are the way to go and he may be right.
I will let you know what happens with the 3 blades.
I don't think I could get the beast to plane with them, but I could strap them on and try!
My engine builder thinks 26 B1's are the way to go and he may be right.
I will let you know what happens with the 3 blades.
Thread
Thread Starter
Forum
Replies
Last Post
chevalcabre
Fountain
16
05-13-2007 07:52 PM
