![]() |
31SS Questions
-are there any differences between a 2000 and 2003 31ss hull and any other changes?
-if you had the chance, would you purchase one with twin 502efi's or twin 496mag ho's? (both with about 130 hrs) -how much does a 2003 31ss weigh (no arch)?-about 7800 dry? -how difficult to change the plugs? -I would guess a starter replacement would be out of the question without pulling a motor? -how easy is it to replace impeller. Can you get the belt and brackets off and get down to take off the hoses so you can pull the entire bracket and impeller off? |
I'd go with the mags as they are closed cooling. 502's are strong motors with good internals. Plugs are doable, but tight getting to centerline plugs. Impellers, doable. 7000lbs advertised dry weight. Not sure if they are any lighter since they started the bagging process. No changes to hull design that I am aware of during that period other than the bagging.
Never had to replace a starter. Thank God! |
How many problems did Sonic have with their boats in 03 with the new infusion process? Anyone have any problems? Is an 03 boat worth buying?
|
Originally Posted by bigboat28
(Post 2340751)
How many problems did Sonic have with their boats in 03 with the new infusion process? Anyone have any problems? Is an 03 boat worth buying?
|
Is the 31 cored with anything, if so what,(hull,deck).
|
Does anyone know how sonics are constructed, cored with anything, hull bottom hull side or the deck and what about the liner?
|
How does the 31 Sonic react to the drive being trimmed? Is the 31 a fun boat to drive?
|
Can the 31 be trimmed up or is it pretty stuck to the water?
|
Trim'r up!!! Absolutely loves it! It's a great boat to drive!
|
Originally Posted by bigboat28
(Post 2383502)
Can the 31 be trimmed up or is it pretty stuck to the water?
|
Originally Posted by bigboat28
(Post 2383501)
How does the 31 Sonic react to the drive being trimmed? Is the 31 a fun boat to drive?
We have this one fueled and ready; sitting at the Active Thunder factory. Come on down to Ft. Lauderdale/Pompano Beach, and go for a ride. http://www.offshoreonlyclassifieds.c...o19437-en.html |
I have had a ride in one a few years back but it was a short ride and on glass flat water. Sydwayz I'd love to ride in your boat, I'am the one trying to make you guys a deal with the Formula.
|
Originally Posted by bigboat28
(Post 2360606)
Does anyone know how sonics are constructed, cored with anything, hull bottom hull side or the deck and what about the liner?
Lets see if I remember right. Vinylester resin, divinylcel coring. 3 Piece construction,hull, deck and cabin liner, GLASSED together. The 31 is called "the Hardbody" for good reason. Fantastic in rough water. Responsive and fun to drive. Great cabin. Very safe and forgiving, no scary handling issues. I had one for 10 years, the only things that ever needed to be tightened were made by Merc, not sonic. Buy one, you won't be sorry. |
| All times are GMT -5. The time now is 04:00 PM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.