Sonic 42 SS '96
Platinum Member
04-15-2008, 12:53 AM
#33
Registered
Thread Starter
Join Date: Jan 2008
Location: Stockholm
Posts: 17
Likes: 0
Received 0 Likes
on
0 Posts
We came up with several questions, during this weekend ( As always =) )
1. What would you suggest for sanding. Which machines are the best : orbital, vibrating ones, or some else?
2. As you see we have the boat on a trailer, now we have a problem to do the bottom. Would anybody have any suggestions how to do it? Hydraulics, crane, how?
Thank you all in advance!
P.S. see pictures in the post below
1. What would you suggest for sanding. Which machines are the best : orbital, vibrating ones, or some else?
2. As you see we have the boat on a trailer, now we have a problem to do the bottom. Would anybody have any suggestions how to do it? Hydraulics, crane, how?
Thank you all in advance!
P.S. see pictures in the post below
05-26-2008, 05:01 PM
#34
Registered
Thread Starter
Join Date: Jan 2008
Location: Stockholm
Posts: 17
Likes: 0
Received 0 Likes
on
0 Posts
Hey guys.
It's been time, I was last here. :0)
Anybody familiar with AccuLift?
I have disassembled the Acculift engines from the seats, and I need some spare parts. Anybody knows any supplier for such parts??
Thank you all in advance!
It's been time, I was last here. :0)
Anybody familiar with AccuLift?
I have disassembled the Acculift engines from the seats, and I need some spare parts. Anybody knows any supplier for such parts??
Thank you all in advance!
