I had DOMED old school decals made
02-09-2009 | 08:20 PM
#22
Charter Member #37 /Moderator/Platinum Member
Joined: Oct 2000
Posts: 1,326
Likes: 10
From: Lake Norman N.C.
08-25-2009 | 09:56 PM
#27
Registered
Joined: Jan 2002
Posts: 115
Likes: 1
From: Gurnee, IL/ LOTO
Chris -
I'm assuming you have none of the ones you had made left? It was awhile ago.
I've got one of my originals that I took off my old truck but there is barely any adhesive on it.
Let me know I would love to buy a couple.
Just bought an Ford F350 SD and would like for back windows. One on each side.
Thanks.
Steve -
I'm assuming you have none of the ones you had made left? It was awhile ago.
I've got one of my originals that I took off my old truck but there is barely any adhesive on it.
Let me know I would love to buy a couple.
Just bought an Ford F350 SD and would like for back windows. One on each side.
Thanks.
Steve -
08-26-2009 | 05:13 AM
#28
Thread Starter
Charter Member #1055/Moderator
Joined: Feb 2001
Posts: 4,585
Likes: 0
From: CNY
Steve,
I have lots left! Pay pal or check, whatever works for you, just let me know, my email is in the first post on this thread and in my profile.
Thanks,
Chris
I have lots left! Pay pal or check, whatever works for you, just let me know, my email is in the first post on this thread and in my profile.
Thanks,
Chris
__________________
[img][/img]
[img][/img]
08-26-2009 | 06:54 PM
#29
Registered
Joined: Jan 2002
Posts: 115
Likes: 1
From: Gurnee, IL/ LOTO
Chris -
I did call a local decal shop in my area today (International Decal in Northbrook, IL). It is not an easy or cheap proposition to have larger decals made. Especially if you only want two.
First I have to supply him with the camera ready art (electronic - high res.) of which I doubt Sonic could give to me just for asking. I do have one of the stickers that I bought from their website, but reproducing a larger decal from a small piece of artwork is never good because you loose detail and sharpness. The other way around is ok.
Then he told roughly $50 each for a 12-14" wide by 6-8" high size. That's expensive! This is the size (I think) would look the best on the two windows (on eithr side of the slider). I think you said, however, yours are smaller?
My question is How did Jim D. get all the ones he had made so reasonably priced? Quantity I'm assuming. Can we collectively order another run? Sounds like more than just would want some.
Thanks.
Steve -
I did call a local decal shop in my area today (International Decal in Northbrook, IL). It is not an easy or cheap proposition to have larger decals made. Especially if you only want two.
First I have to supply him with the camera ready art (electronic - high res.) of which I doubt Sonic could give to me just for asking. I do have one of the stickers that I bought from their website, but reproducing a larger decal from a small piece of artwork is never good because you loose detail and sharpness. The other way around is ok.
Then he told roughly $50 each for a 12-14" wide by 6-8" high size. That's expensive! This is the size (I think) would look the best on the two windows (on eithr side of the slider). I think you said, however, yours are smaller?
My question is How did Jim D. get all the ones he had made so reasonably priced? Quantity I'm assuming. Can we collectively order another run? Sounds like more than just would want some.
Thanks.
Steve -
08-26-2009 | 07:48 PM
#30
Thread Starter
Charter Member #1055/Moderator
Joined: Feb 2001
Posts: 4,585
Likes: 0
From: CNY
Mine are smaller. They were supposed to be the same as the originals, but came out a little smaller. 4 x 10, see the first post in this thread for pics with a 6" ruler.
__________________
[img][/img]
[img][/img]
