Angled gauge bezels installed
#1
Registered
Thread Starter
Angled gauge bezels installed
I was having difficulty reading the top row of gauges at speed, especially the depth gauge with the sun glare. Angled bezels from CP Performance (supporting vendor on this site) solved the issue. A rather low cost modification that helped add some style to the dash. The photo's are taken from my driving position height.
Before
After
Before
After
#3
Registered
Thread Starter
Thanks Jim. A rather small update compared to your great looking new gauges, etc... When I bought the boat I was thinking I needed to install angled bezels but the ones I found would not fit because the bottom diameter was too large. When I seen a pic of yours last fall I continued my search and found these from CP Performance that fit very nicely.
#4
Registered
Join Date: Mar 2003
Location: Manassas Va.
Posts: 365
Likes: 0
Received 0 Likes
on
0 Posts
Jim don't give all the secrets away. I got another one. I will have to send you the pictures to post. I had PPI interiors install cup holders into the seat corners of the bolsters when they recovered them in new vinyl it looks great. Because everythime somebody climbs into your boat with a drink the first thing they do is rest it on the seat corner, and 70% of the time it ends up on the carpet. Jim you also have extra cockpit lighting.
Last edited by 45SS; 06-12-2009 at 10:35 AM.