Dana Flo-Torques on 496HO
09-29-2011 | 09:04 AM
#1
Thread Starter
Registered
Joined: May 2009
Posts: 125
Likes: 0
From: Glenwood, Maryland
Dana Flo-Torques on 496HO
Hey Guys:
Thinking about replacing the manifolds and risers on the 496HO's in my 31SS this winter. Looking at either the Dana Flo-Torques or CMI E-Tops. Has anyone had any experience with either of these products ? Thoughts ?
Steve
Thinking about replacing the manifolds and risers on the 496HO's in my 31SS this winter. Looking at either the Dana Flo-Torques or CMI E-Tops. Has anyone had any experience with either of these products ? Thoughts ?
Steve
09-29-2011 | 09:54 AM
#2
Registered
Joined: Dec 2003
Posts: 1,166
Likes: 49
From: Port Charlotte, FL
09-29-2011 | 11:19 AM
#4
VIP Member
Joined: Jan 2002
Posts: 2,998
Likes: 112
Stainless Headers are beautiful.
However hard to beat the cost and reliability of the Dana's
My friend is on his third season ( with the Dana's ), single engine
V-Bottom with 1,500 hp zero issue's
Good Luck with your decision
Jon
__________________
Last edited by cougarman; 09-29-2011 at 11:28 AM.
09-29-2011 | 07:22 PM
#5
Charter Member #1055/Moderator
Joined: Feb 2001
Posts: 4,585
Likes: 0
From: CNY
