New steering wheel
 

I am looking to update my 2000 260 prowler. First thing will be a new steering wheel and hub. Question, just to be sure. This is a standard tapered hub on this boat right? This is what most of the aftermarket wheels and hubs are. Thanks!

on my 98 i only changes the wheel, i didn't replace the the hub.

i can't remember where i got it from, did it so long ago.
https://cimg0.ibsrv.net/gimg/www.off...5766c829a0.jpg

Thanks for the response. You just replaced the wheel on the stock hub. So, that is a Dino wheel. Thats what is on my boat now. I picked out a wheel that is the Momo bolt pattern. So I'm going to swap out the hub too. I just dont want to go through the trouble of pulling the old hub off to see if its a tapered shaft or screw on. When I pull it off I want to have the wheel and hub with me. I anticipate it to be on there pretty good, since its a 20 year old boat!

and you know the worst part about it? when i sit down in the drivers seat this is exactly what i see, i'm 5'8" and i can't see over the wind screen unless i'm either standing or sitting on pillow's.

Sit on your throw cushion, that's what I do. Besides, if you need it for an emergency, it is right there.

i have done that. but my legs are hanging down, i'm going to ad a higher foot rest so at least i'll have something to rest my legs on and brace myself with. it's only taken me 22 years to this, since my boat is a 98 and i bought it new.

just installed my Christmas present.
https://cimg0.ibsrv.net/gimg/www.off...f5343f9ee4.jpg
https://cimg9.ibsrv.net/gimg/www.off...e20ff11834.jpg
My Christmas present. It is a standard tapered shaft.