Winter Upgrade
The following 2 users liked this post by Prowler:
Sydwayz (01-24-2021), Twin O/B Sonic (01-24-2021)
The following users liked this post:
Sydwayz (01-25-2021)
#7
Charter Member #1472
Charter Member
Thread Starter
Update
Just got the vinyl back last week. Scoop got back on Sunday. Do some wiring and cleaning and should be good to go.
pic's
Just got the vinyl back last week. Got scoop back Sunday. Have to wire the new MSD box. And a good cleaning.
Have a little more to do in here.
Have to install scoop
pic's
Just got the vinyl back last week. Got scoop back Sunday. Have to wire the new MSD box. And a good cleaning.
Have a little more to do in here.
Have to install scoop
Last edited by Prowler; 05-04-2021 at 05:04 PM.
The following users liked this post:
sonicss42 (05-04-2021)
#8
Registered
Yikes that looks tight in there! Can't wait to hear how it runs. Can you post a picture of the backend of your boat? I wanna see what tabs you are running with that crazy hp.
#10
Charter Member #1472
Charter Member
Thread Starter
so, i bought what i thought was an XR upper and an IMCO lower. put it on and could not get on plane. what the heck. go back home measure the drive and it's a -2 shorty. tabs down, drive tucked, as soon as it started to roll over on plane, the prop would blow out. so it's safe to say that my prowler don't like a shorty. just in case someone is thinking about installing one. i guess i'll order a spacer and try it again.