Yup the plastic step pads are inside the boat; as you step down into the cockpit; right beside the rear seat, next to the cupholders.

Sorry, my mistake. I have the same steps, but mine are aluminum slots with some kinda hard material slid into the slots, and the end of the slots are crimped in some, so the material wont slide out. The material is white though and very hard. The wife actually cut the bottom of her foot on the corner of one of the sharp crimps. What a mess !

I cant comment if this is the same as on anything under 42'. Would be nice if you could get something in billet/powder coated.

guys i will call eddie marine thur. and see if they will make us the steps in the size we need . i may need some one to fax me a template of the measurements and where the screws go . my boat is away for the winter and can't get to it till spring . i will post info thur.

guys still have to talk to sonic yet but eddie marine said they could make us the right size steps for our boats if we put in a order for 20 total steps ( 10 pairs ) . the only thing is the original screw holes will not be in the same spot as the new ones due to the molded rubber being in that spot so you will have to drill new holes , no biggy. the old holes will be covered . i'm looking to have them done in purple but we can see if they'll do other colors in the same order. anyone interested ? i know of 3-4 friends that i boat with that are. i'll try to get in touch with sonic to see if they are interested.

If these are the same as are in my 42, Iwould be interested in getting some in Red...... Will measure & repost.

26 Sonic, I'd be interested in a pair in purple also. Would they be the same style as the picture that Sydwaz posted? Thanks, Steve

I am interested also .I was just looking at this the other day.Let me know who I need to pay .
Thanks
David

509sc they are the same style as sydwayz posted but our dimensions.

I am in. If I run into any other 26 owners; I will ping them.

You can count me in for a pair in purple. If they are the same size for the 42. I will have to see what TeamSonic42 comes up with.

Steve