My first Sonic
#12
I'll post some Pics as soon as I figure out how.
There's a pic on my free geocities photo page.
http://www.geocities.com/chessie2cru...photopage.html
There's a pic on my free geocities photo page.
http://www.geocities.com/chessie2cru...photopage.html
#14
Guest
Posts: n/a
Originally posted by GO4BROKE
Why on earth would you be surprised at smoking a baja? I do it all the time!! Doubly so in rough (4' or better) water. 15 gph is pretty reasonable fuel consumption. If your 454 mags are 2000's also then they are the same 385hp EFI motors as LoveMachine has, excellent motors. Don't be afraid to run fast, especially in rough, sloppy water, the faster you go the more stable the boat is. Your WOT rpm's should be 4600 to 5000, 4800 is OK. If I had to pick an exact speed for your boat I would guess 72 mph.
Congratulations!!
Why on earth would you be surprised at smoking a baja? I do it all the time!! Doubly so in rough (4' or better) water. 15 gph is pretty reasonable fuel consumption. If your 454 mags are 2000's also then they are the same 385hp EFI motors as LoveMachine has, excellent motors. Don't be afraid to run fast, especially in rough, sloppy water, the faster you go the more stable the boat is. Your WOT rpm's should be 4600 to 5000, 4800 is OK. If I had to pick an exact speed for your boat I would guess 72 mph.
Congratulations!!
sorry for but'n in - 385 EFI mags are 4800-5200 rpms, sounds like he might be propped to large unless he had a "normal" full load.
#15
Sorry Kentz..... Go4broke had it right 4600-5000 rpm....
Here's a spec sheet....
http://www.boatinginternational.com/...454_magmpi.htm
I believe the 377 6.2 has a max 5200rpm range which is 350hp and I believe the 320hp version does as well.
How's that Viper treating you???
Here's a spec sheet....
http://www.boatinginternational.com/...454_magmpi.htm
I believe the 377 6.2 has a max 5200rpm range which is 350hp and I believe the 320hp version does as well.
How's that Viper treating you???
#17
Actually it was loaded down full of fuel, water, beer, and 5 people.
I didn't get a chance to get it on the GPS this weekend. I somehow broke an engine cupler on my port engine. It still is under warranty. I just hope this is a covered item. I'm trying to find a place to fix it now. There's a guy in Pasadena, MD named Jim Benny at Advanced Marine who has done all the work on this boat. The only problem is he has a full shop so I'm looking for another shop. Any Suggestions? I'm in the Edgewater, MD area.
Once fixed, I'll get it on the GPS.
I didn't get a chance to get it on the GPS this weekend. I somehow broke an engine cupler on my port engine. It still is under warranty. I just hope this is a covered item. I'm trying to find a place to fix it now. There's a guy in Pasadena, MD named Jim Benny at Advanced Marine who has done all the work on this boat. The only problem is he has a full shop so I'm looking for another shop. Any Suggestions? I'm in the Edgewater, MD area.
Once fixed, I'll get it on the GPS.




, oh well, it ran great at 5000

