Offshoreonly.com - Cam removal on 358

Page 2 of 2

Show 40 post(s) from this thread on one page

Offshoreonly.com (https://www.offshoreonly.com/forums/)

- Sonic (https://www.offshoreonly.com/forums/sonic-46/)

- - Cam removal on 358 (https://www.offshoreonly.com/forums/sonic/98002-cam-removal-358-a.html)

splashandburn

03-17-2005 03:04 PM

Re: Cam removal on 358

Quote:

Originally Posted by roadrunner

I can go out with a tape and get you what you are looking for next week . I think its to tight though.
RR

Thanks Roadrunner. If you get a chance to do that it would be great!

roadrunner

03-18-2005 02:40 PM

Re: Cam removal on 358

Quote:

Originally Posted by splashandburn

Thanks Roadrunner. If you get a chance to do that it would be great!

Ok here ya go ! on star -motor front of engine inside of pulleys
to bulkhead 13" If you were to hole saw looks like a BIG hole
and on mine removel of the fuel on off switches. On port
less room 10" battery swiches moved and charger moved
Big hole for proper angle . After review I would consider
pulling. just my 2cents.

RR

splashandburn

03-20-2005 02:26 PM

Re: Cam removal on 358

Roadrunner,
Thanks very much for checking the dimesnsions for me. I'd be afraid to cut a hole in those spots because I'm not sure what is behind that bulkhead - fuel tanks maybe?? I was kinda leaning towards pulling the motors so it looks like that's my only choicce. Thanks again.

All times are GMT -5. The time now is 05:58 AM.

Page 2 of 2

Show 40 post(s) from this thread on one page