Texoma BS Thread
#321
Registered

Joined: Jan 2007
Posts: 6,477
Likes: 358
From: Mansfield, TX
Nice speed numbers Johnny
Got my 502's dyno'd. Their almost ready to drop-in. Can't wait to be behind the throttles again.
I heard Little Mineral Marina is going to open up a small floating restaurant/bar. Also heard their going to offer breakfast. Should be fun.
Got my 502's dyno'd. Their almost ready to drop-in. Can't wait to be behind the throttles again.
I heard Little Mineral Marina is going to open up a small floating restaurant/bar. Also heard their going to offer breakfast. Should be fun.
#322
he has outrun me.
#326
Check your PM for the low down on the Motion. I also blew an oil leak on the Warlock last time out. It is somewhere around the remote oil filter adapter where it plugs into the block on the port motor. That puts it in the back and to the outside and under the headers. i am going to pull the carb and some other things off this weekend to try to get to it. If the motor has to be pulled i may have to pull it over to leon.
#327
Thread Starter
Registered

Joined: Mar 2003
Posts: 3,075
Likes: 80
From: Fort Worth, TX
Check your PM for the low down on the Motion. I also blew an oil leak on the Warlock last time out. It is somewhere around the remote oil filter adapter where it plugs into the block on the port motor. That puts it in the back and to the outside and under the headers. i am going to pull the carb and some other things off this weekend to try to get to it. If the motor has to be pulled i may have to pull it over to leon.
#329
Slow leak. Oil pressure very slowly goes down over the course of a few minutes (5-6lbs in 10 minutes) Bilge fills up with a few quarts of oil. Only happens when engine turning.
#330
Banned
Joined: Oct 2006
Posts: 5,844
Likes: 0
From: Bradenton Florida



but thats ok leon will make it rite for you