I would do it for 20 bucks per inj. and that's putting new basket filters back in. I clean them at least 3 - 20 mins intervals bare min before retesting. Normally I charge 25 per inj. for this type. Shipping is on you.

Important tip even if you do not use me. Mark your injectors per which hole they came out of. Also we match our testing fluid to the same average of specfic gravity as pump gas or we need to know if you are using a special gas ie: race gas,.That is important as well because if not your flow testing #'s will be off, My cell 817-658-7721 if needed..

Turn around time should be 2 days not counting shipping time, Good luck whomever you use and make sure they use the correct new basket filters back in your injectors. IMO once you pull them out internally they are not same because the removal tool can nick them and or scar or damage the supports of the filter mesh..

Hey BUP- if your truly wanting to do something I am all in - we can rent something garage doesn't matter - I have lots of connection in the lewisville are and accesses to some big buildings in AZLE if my buddy doesn't have them leased out ! Lete me know / likes said I'm not a mechanic but as a hunting guide I'm not afraid to get dirty ! I can afford any direction y'all would want to go !

That would be great - I still have boat inventory to sell and own more than one personal boat. Actually too many. When I do get some time I have a couple of Cobalts to restore as well that are mine. I like the older Cobalts for some odd reason.

I do know of another place in SW Ft Worth, rents about 2800 per month with a 10000 sq ft feet building on a Hwy. 7000 sq ft is shop space as the front is storage then a showroom. Showroom does not have tall celings but the 7000 sq ft shop has very tall ceilings. it has a huge compressor already. We would need more people as I am trying to down size. My phone # is posted in this thread. I am still currently working on customers boats as well. If you have a great deal let me know and again I would need a bit of outside space until I get rid of my boat inventory. Used runabouts.

We would need others that could be trusted to help with storage rent plus really not jack with each others tools.

To really work on boats you need IMO at least 2500 sq ft. min. but that all depends on boat size and equipment, tools, reference material being used. I know I have at least 500 service manuals min.

double post delete.

Just PM when and where I am open most days of the week unless I am working on the Bertram in Clear Lake and I can schedule around that.

John

Just to be upfront, I don't have a lot to bring to the table, a few tools a little knowledge and 25ft baja - I will look around at a few locations to see if there Is anything that will fit the needs- also hope to see others chime in with some interest. No worries on the jacking with others tools on my end, but if we do this I will let anyone use anything I have if they need it.

I think we need to move are rides to Houston as those sportboaters are all over any form of getting together. Like I said and not to sound like a broken record, DFW performance boat community is very lamb. The dude from Colo with the 380 Elim see where I am coming from. Great area to hang with the wakeboard boat crowd and the bass boat crowd.

Hell how many millions upon millions of people live in the area and how many people from DFW are talking about getting together to jack around with their performance boats ? A big fat 2. Wow if this was LOTO or Havasu we would have to find 50 buildings at least plus the thread would have a thousand replies. I'll be quit now but I think I made my point almost crystal clear. .

YI am hoping more want to get involved, and yes the power boats scene here in DFW is nothing like other places ( not even close ) and if for some reason this doesn't work out I will still offer you a set of hands on any project you have going on anytime !... Still hopefully others will get on board!

Rick I'm really not asking for help. I just thought it is a good way to share a big building and share the expenses for guys to store their boats especially big spot boats. Plus sit around and tell war stories.

Why would you move your boat away from were you boat at ? I used to store a boat at King Brothers Storage many years ago to boat on Lewisville. It is very hard to store anything bigger than 32 ft around here fully enclosed.

I am on the same page - just Think it would be fun working on boats, helping each other out and like you said just BS'N and talking about boats or whatever. I would still boat here butting would be nice to be around others who share the love of he sport. And i know your not looking for help, just thought I would throw it out there !

I'm sure others will get involved !