New 2009 32' Spectre Completed
#81
Registered
Thread Starter
Thanks for all the compliments. My family and I are very happy to be a part of the Spectre family. We are very excited that Spectre is using our demo boat in their advertising. As the official Gulf Coast dealer, I can answer your questions about pricing or questions on the Spectre line of boats. Just send me a PM.
Last edited by TB Racing; 07-26-2010 at 10:22 AM.
#82
Registered
Thread Starter
I just got my case (25) of Powerboat magazines in and the boat looks great. I just want to thank Tony, Jay, and John at Spectre for making this happen. I am very pleased to be a part of the Spectre Team. I also want to thank Ryan, Jason and every one at Powerboat magazine for there hard work in these bad time's. Here is a look at the cover.
Thanks to all !!!!!!!!
Tommy Buras
Thanks to all !!!!!!!!
Tommy Buras
Last edited by TB Racing; 07-29-2010 at 10:11 AM.
#84
Registered
Join Date: May 2010
Location: Sarasota, Fl
Posts: 249
Likes: 0
Received 0 Likes
on
0 Posts
#85
Registered
What props were you running when you hit 104? Have you done any testing with different props/set-ups to see if theres more speed in the boat? Again awesome boat!!
Thanks
Dan
Thanks
Dan
Last edited by OL40SVX; 08-02-2010 at 04:07 AM.
#86
Registered
Thread Starter
#88
Registered
The reason for the soft limiter at 6k (On the 300xs/250xs) is more for quick reving times (i.e. props comming out of the water, or way under propped). If the ECM thinks that the engine revs to quickly around 6k it will start to go into full rich (Fuel) mode. In a normal top speed type run at WOT the RPMs are climbing slow enough to allow the engine to run up to 6300.
#89
Registered
Thread Starter
The Motors on this boat are all stock. The 104 MPH we ran was on the rev-limiter. The boat still has a little more in it like Johnny T said in PB.
Thanks,
Tommy
Thanks,
Tommy