Offshoreonly.com

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   Sunsation (https://www.offshoreonly.com/forums/sunsation-43/)
-   -   2009 WOT 32 Sunsation (https://www.offshoreonly.com/forums/sunsation/247517-2009-wot-32-sunsation.html)

SC288 03-10-2011 06:09 PM


Originally Posted by campionchase910 (Post 3347145)
OK I think I figured this out!

Nice looking boat!

Riley0114 03-10-2011 10:17 PM

great looking boat champion my friend owns a 32' sunsation innovator (i understand very few of that boat made) and i must say Sunsation makes a very beautiful boat

campionchase910 03-11-2011 04:50 AM

going from a single to a twin, there may be some getting use too. I don't know haven't owed a twin:eek:

THE 288 KID 03-11-2011 06:14 AM

Just do what I do and shove every lever that's available to your right forward as far as they go.

LAriverratt 03-11-2011 06:30 AM


Originally Posted by campionchase910 (Post 3347768)
going from a single to a twin, there may be some getting use too. I don't know haven't owed a twin:eek:

did the same thing...I have not perfected docking just yet :lolhit: but its not hard...I just don't get in any hurry and never touch the wheel or throttles.

campionchase910 03-11-2011 06:39 AM


Originally Posted by THE 288 KID (Post 3347785)
Just do what I do and shove every lever that's available to your right forward as far as they go.

:eek::eek::lolhit:

campionchase910 03-11-2011 06:41 AM


Originally Posted by LAriverratt (Post 3347791)
did the same thing...I have not perfected docking just yet :lolhit: but its not hard...I just don't get in any hurry and never touch the wheel or throttles.

LA you don't want to scratch the paint with any dock rash:eek: nice and slow

LAriverratt 03-11-2011 07:43 AM

I haven't put a scratch on her yet!:drink: some of the A holes that are around here don't seem to give rats azz so ya gotta watch your chit close :angry-smiley-055:

campionchase910 03-11-2011 07:59 AM


Originally Posted by LAriverratt (Post 3347829)
I haven't put a scratch on her yet!:drink: some of the A holes that are around here don't seem to give rats azz so ya gotta watch your chit close :angry-smiley-055:

for sure especially those PR***ks on sea doos, flying by the dock when you don't have it on the wips:hitit:

verbi69 03-11-2011 08:42 AM


Originally Posted by campionchase910 (Post 3347848)
for sure especially those PR***ks on sea doos, flying by the dock when you don't have it on the wips:hitit:

Keep a paint ball gun handy......

Nice looking ride!

LAriverratt 03-11-2011 08:54 AM


Originally Posted by verbi69 (Post 3347898)
Keep a paint ball gun handy......

Nice looking ride!

good Idea!!!:lolhit:

campionchase910 03-11-2011 09:06 AM


Originally Posted by verbi69 (Post 3347898)
Keep a paint ball gun handy......

Nice looking ride!

now that could be fun:grinser010::lolhit:

MahopacMarine 03-11-2011 10:32 AM


Originally Posted by campionchase910 (Post 3347108)
Ok Deposit received and picking it up early April. Thanks again Tom for the help in giving me the lead!!:ernaehrung004:

Congrats Brian!!

Let me know if you need anything. We are 20 mins from him.

Tom

MahopacMarine 03-11-2011 10:34 AM


Originally Posted by sunsation96 (Post 3347166)
Congrats awesome looking 32' you will love the ride also! I don't remember seeing that for sale. Nice Find!

It looked different sitting on the lift Jon. You actually posted a pic of it on the Sunny forum.

campionchase910 03-11-2011 10:53 AM


Originally Posted by MahopacMarine (Post 3348009)
Congrats Brian!!

Let me know if you need anything. We are 20 mins from him.

Tom

Tom for sure, My wife and I will stop buy and meet you. I will probably need some tie down straps for the trip home etc. We are leaving on 7th of April be there on Friday the 8th.:drink:

Magic Medicine 03-11-2011 01:37 PM

:coolcowboy:Congrats on the new ride, now change your screen name already:party-smiley-004::drink:

campionchase910 03-11-2011 05:35 PM


Originally Posted by Magic Medicine (Post 3348155)
:coolcowboy:Congrats on the new ride, now change your screen name already:party-smiley-004::drink:

Man you guys are hard on me:lolhit:I just figured out how to post pics:eek:let me figure this one out now:party-smiley-004:

Magic Medicine 03-12-2011 07:15 AM


Originally Posted by campionchase910 (Post 3348315)
Man you guys are hard on me:lolhit:I just figured out how to post pics:eek:let me figure this one out now:party-smiley-004:

:drink::drink::drink::drink:

THE 288 KID 03-12-2011 09:56 AM

So this was the eBay boat eh'? I stopped bidding at 65k I think lol.

campionchase910 03-12-2011 12:49 PM


Originally Posted by THE 288 KID (Post 3348649)
So this was the eBay boat eh'? I stopped bidding at 65k I think lol.

one owner boat from CT:drink:

THE 288 KID 03-13-2011 07:12 AM

Rock on!

FstBoats 03-13-2011 11:05 AM


Originally Posted by campionchase910 (Post 3323060)
What is the wot on a 32 sunsation s with twin 496's HO's and what speed? Would labbing the props give you that extra edge without voiding warranty? Thanks in advance.:ernaehrung004:

2008 Sunsation 32 SSX 496 HO's CMI Sport Tube Headers 32 Pitch Labbed Bravo 1's Raised X Dimension when Built

campionchase910 03-13-2011 12:41 PM


Originally Posted by FstBoats (Post 3349239)
2008 Sunsation 32 SSX 496 HO's CMI Sport Tube Headers 32 Pitch Labbed Bravo 1's Raised X Dimension when Built

now that is sweet:eek:

THE 288 KID 03-13-2011 09:50 PM

It's a badass boat.... I should own it but I'm not a Baller like fstboats...

LAriverratt 03-14-2011 06:12 AM


Originally Posted by FstBoats (Post 3349239)
2008 Sunsation 32 SSX 496 HO's CMI Sport Tube Headers 32 Pitch Labbed Bravo 1's Raised X Dimension when Built

nice...#!!!!:coolcowboy:...I was looking at my drives on the 32 yesterday....looks like they are a litte low...anyone here ever raised the X on T/S 32's????

THE 288 KID 03-14-2011 06:38 AM

^^^ I still think about your boat when I'm getting it on with less than desirable ladies... :party-smiley-004:

07DominatorSS 03-14-2011 06:16 PM


Originally Posted by FstBoats (Post 3349239)
2008 Sunsation 32 SSX 496 HO's CMI Sport Tube Headers 32 Pitch Labbed Bravo 1's Raised X Dimension when Built

He fails to mention that is behind his truck heading down I-75!:eek::eek::eek: J/K

campionchase910 03-14-2011 06:25 PM


Originally Posted by 07DominatorSS (Post 3350241)
He fails to mention that is behind his truck heading down I-75!:eek::eek::eek: J/K

07 I sent you a pm:party-smiley-004:

FstBoats 03-15-2011 10:55 PM


Originally Posted by 07DominatorSS (Post 3350241)
He fails to mention that is behind his truck heading down I-75!:eek::eek::eek: J/K

FUNNY!!

My 2011 Trailer just got delivered, Only time its been on a trailer was the day I picked it up from the factory.....and that trailer wasn't in any condition to go over 55:eek:

campionchase910 03-16-2011 05:07 AM


Originally Posted by THE 288 KID (Post 3349698)
^^^ I still think about your boat when I'm getting it on with less than desirable ladies... :party-smiley-004:

Kid they need lovin to....:lolhit::eek:

LAriverratt 03-16-2011 05:56 AM


Originally Posted by FstBoats (Post 3351419)
FUNNY!!

My 2011 Trailer just got delivered, Only time its been on a trailer was the day I picked it up from the factory.....and that trailer wasn't in any condition to go over 55:eek:

lol...well like i said, nice # to be running. I'm still a little sceptical of getting into the mid 80's with mine just don't see how I'm gonna pick up 4-5 with prop work.

FstBoats 03-16-2011 08:24 AM


Originally Posted by LAriverratt (Post 3351476)
lol...well like i said, nice # to be running. I'm still a little sceptical of getting into the mid 80's with mine just don't see how I'm gonna pick up 4-5 with prop work.

CMI Sport Tube Headers Really Woke Up my 496HO's! and allowed me to run a 32 pitch prop and still be at 5100 rpm's W.O.T.

campionchase910 03-16-2011 11:02 AM


Originally Posted by LAriverratt (Post 3351476)
lol...well like i said, nice # to be running. I'm still a little sceptical of getting into the mid 80's with mine just don't see how I'm gonna pick up 4-5 with prop work.

LA, my next edition will be Raylar BCK103 engine kits and see mid -90 mile per hour performance with stock exhaust and a few miles an hour faster with the exhaust header upgrades.

LAriverratt 03-16-2011 02:31 PM


Originally Posted by campionchase910 (Post 3351721)
LA, my next edition will be Raylar BCK103 engine kits and see mid -90 mile per hour performance with stock exhaust and a few miles an hour faster with the exhaust header upgrades.

I have looked into that option...I'm not quite mechanically inclined enough to attempt the kit install myself plus I have bravo X drives and I think I'd be better off with XR's and the extra HP so it gets pretty $$$$ but I still think about it A LOT!!! I also keep my eyes and ears pealed for a good deal on a pair of 525's :coolcowboy: better yet...are the new 600 sci's still for sale in the classifieds????:evilb:

campionchase910 03-16-2011 06:49 PM


Originally Posted by LAriverratt (Post 3351863)
I have looked into that option...I'm not quite mechanically inclined enough to attempt the kit install myself plus I have bravo X drives and I think I'd be better off with XR's and the extra HP so it gets pretty $$$$ but I still think about it A LOT!!! I also keep my eyes and ears pealed for a good deal on a pair of 525's :coolcowboy: better yet...are the new 600 sci's still for sale in the classifieds????:evilb:

LA the bravo x's would be fine with the Raylar kit

THE 288 KID 03-17-2011 12:57 AM

Give Tyler crockett a call hes making 575 dyno h.p. from h.o.'s and quoted me 6500$ to do it and that's a complete rebuild, pistons, heads, ecu, etc etc.... all u need is headers

He also sed my bravo would handle it no problem...

campionchase910 03-17-2011 04:44 AM


Originally Posted by THE 288 KID (Post 3352344)
Give Tyler crockett a call hes making 575 dyno h.p. from h.o.'s and quoted me 6500$ to do it and that's a complete rebuild, pistons, heads, ecu, etc etc.... all u need is headers

He also sed my bravo would handle it no problem...


:boat::eek::eek:

LAriverratt 03-17-2011 05:44 AM


Originally Posted by THE 288 KID (Post 3352344)
Give Tyler crockett a call hes making 575 dyno h.p. from h.o.'s and quoted me 6500$ to do it and that's a complete rebuild, pistons, heads, ecu, etc etc.... all u need is headers

He also sed my bravo would handle it no problem...

I'll check into that option....depending on headers that's gonna add 3 to 5k x 2 for me which isn't too bad but the engine upgrades are a year away for me right now...still need to get a few more hours out of what i have.

THE 288 KID 03-17-2011 06:41 AM

575 n/a h.p. would put my old style 288 into the 80's fo sho!

campionchase910 03-17-2011 07:01 AM


Originally Posted by THE 288 KID (Post 3352384)
575 n/a h.p. would put my old style 288 into the 80's fo sho!

for sure.......mercury states the bravo x is good for 600hp, and probably under rated at that. Now I wouldn't be bolted a 1075 to it or something along that note:eek:


All times are GMT -5. The time now is 12:53 PM.


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.