![]() |
It doesn't matter what any states guidelines are, you don't have to worry about it if you just pay the bill...
SonicKevin- I believe it was a little over 2k a side but in my opinion you would be gaining that back in value vs keeping the mags |
I wanted to buy the orange red and yellow (innovator paint job) 04' dominator in New Hampshire before I got the a/t. Unfortunately "Lisa" the owner has a crystal meth problem and wouldn't come off like 100k or some other outrageous asking price. It's like, hello?! Check the god Damn market you crazy coots!
|
Originally Posted by ajfisher
(Post 3813088)
It doesn't matter what any states guidelines are, you don't have to worry about it if you just pay the bill...
SonicKevin- I believe it was a little over 2k a side but in my opinion you would be gaining that back in value vs keeping the mags |
I saw and chatted with the owner of one of the single dominators up at torch... It had the purple checkers with yellow fade up front... Konrad drive. I think he said it ran around 80. Twin HO's in a 32 have been reported anywhere from 80-85 for the non-stepped version, they are lighter and accelerate faster but give up a few mph on top without the steps. They do have a sleeker profile in the water than the stepped version though in my opinion
|
Old style with HO's high 70's - low 80's. New style mid 80's, upper 80's with a lil work here and there.
|
The cost of two sets of headers =$ 11, 000. The coast of sending his two motors to Houston to have them, reworked to the HO's ? That is why I said it was a bit of cash to go 80 MPH.
|
Originally Posted by ajfisher
(Post 3813601)
I saw and chatted with the owner of one of the single dominators up at torch... It had the purple checkers with yellow fade up front... Konrad drive. I think he said it ran around 80. Twin HO's in a 32 have been reported anywhere from 80-85 for the non-stepped version, they are lighter and accelerate faster but give up a few mph on top without the steps. They do have a sleeker profile in the water than the stepped version though in my opinion
|
YARR- he had a big supercharged motor putting out around 650-700 or so I believe, it has been a while since I talked to him, running a 5-blade off a konrad drive and an extension box. Unique setup for sure. One of the intake vents on the side was modified as an outlet port for the intercooler
|
Originally Posted by Captain YARRR
(Post 3816025)
What what kind HP was he running to do 80 with a single? Must have been quite a beast.
|
On the interstate? :)
|
| All times are GMT -5. The time now is 06:47 PM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.