Offshoreonly.com - Unified Championship

Page 5 of 6

Show 40 post(s) from this thread on one page

Offshoreonly.com (https://www.offshoreonly.com/forums/)

- Super Boat International (https://www.offshoreonly.com/forums/super-boat-international-191/)

- - Unified Championship (https://www.offshoreonly.com/forums/super-boat-international/82846-unified-championship.html)

tachyon

07-11-2004 03:35 PM

Re: Unified Championship

Quote:

Originally Posted by stevequick

Thanks Dave, it's a real pleasure having you at the races. I did not realize the magnitude of your V12 project. Of course I'm usually the last to figure things out.
I was talking to Rod from Race Crafters about how disappointing it must be for you not to finish. He explained that it's all part of a massive R&D project. I guess if you're moving technology into the future you have to expect a bump or two in the road. Best of luck, see you in Dania. SQ

Steve,

Hopefully we're done with the R&D...actually the motors ran great...broke a prop shaft :( See you in Dania.

dc

AugiePensa

07-12-2004 04:20 PM

Re: Unified Championship

Steve, it was a great complement that Lee gave Smitty and I along with The Jersey Boyz when we arrived in Sarasota and a couple of other teams agreed, THANKS. We race where we want but where the bodies tell us and we have a ball doing it. It's about time everything is coming together. All the fun we have is because of the people we meet along the way. See you all in Reggieville, Augie

Phantom1

07-12-2004 04:35 PM

Re: Unified Championship

Quote:

Originally Posted by KLAATU

phantom was your'e phantom a three seater? who has xs # 7 now ?

Mine was a two seater. Only one three seater 30' was made to my knowledge.

Wazzup Racing

07-12-2004 06:00 PM

Re: Unified Championship

I have one that is a three seater, for now, soon to be a two seater.......

Wazzup Racing

07-13-2004 12:05 AM

Re: Unified Championship

I'll check the hull # tomorrow. We are really anxious to get working on it. Thought about running the 525 but I think we would be bored to death. Too used to big power. I have a dry sump 840 hp we are going to drop in and test. Jr says best part of this boat is we can roll it and spend the weekend...............

Phantom1

07-13-2004 08:39 AM

Re: Unified Championship

Quote:

Originally Posted by Wazzup Racing

I think that boat had a 1,000 HP engine in it back around 2000. They had a Lexan engine hatch on it at one point to show off the piece. Does it still have the Teflon coating underneath?

Ryan Beckley

07-13-2004 09:35 AM

Re: Unified Championship

It was origanally Tod Werners of Flowmaster/ProMarine, then some guys from PA called eagle motorsports, then the Kostalac's had it , then Q Ball now it's the Next Wazzup. I know it was one of the first few built but it sat unrigged for awhile.

wil ros

07-13-2004 09:40 AM

Re: Unified Championship

I am pretty sure is the #2 out of the mold.

Wazzup Racing

07-13-2004 09:46 AM

Re: Unified Championship

Still has some coating on the bottom, needs to be flipped, lots of hooks....Looks to have had a delam on the port side, when repaired they put a major hook in the inside chine.

stevequick

07-13-2004 09:48 AM

Re: Unified Championship

Quote:

Originally Posted by Augie Pensa

Augie,
Lee tells it like it is. Things are moving in a good direction and the Boyz have had a lot to do with it.
Hey, remember there is not a lot of nightlife in Washington NC. We all need to come prepared for a Big Pit Party. We might need to set the bar lower, maybe an all time low. SQ

All times are GMT -5. The time now is 10:29 PM.

Page 5 of 6

« First

Show 40 post(s) from this thread on one page