how about on the floor ???? I do have 10 toes,

Gary, I've also been looking at these, and I have already decided to add a new wheel with tab buttons. The current location is just no good when you are in 3+ seas at 70 mph and bouncing along trying to reach over or under the throttle and the other switches. I often open my hatch during these conditions because my forearm hits the hatch switch while pressing the tab buttons - not a good situation. This is also the reason Rick and JC modified the hatch to have a glassed in support for the engine cover lift - I pulled the bolts right through the engine cover without knowing it by pressing the down button on the hatch! I think I'll replace my hatch one day when I repower, hoping JC will give me a great deal on that one......ya know, for the design input?????

Keith, so you know exactly what I mean. Let me know if you change over before me ( with superbabi done for big chill ) how you like it !!! I'm sure JC will give you a deal on the rear hatch..............After all you and Rick got the whole superboat builds going strong...............Krackmeup and FX-10 are the reason we did the Superbabi build !!!!!!

Leave It Alone

JD WHY ?????

Lets Try To Figure A Way To Make It Easier For You To Drive. The Wireless In The Wheel Is junk Like every Body Says Never Is In The Same Spot. They Make A Piece That Goes On The Throttle With Two Buttons I Could rig Up To Work The Tabs That would Work . You Have The Button For The Drive In The Handle This Way Just Move Your Thumb To The other Buttons What Do you think???????? HAPPY TURKEY DAY

I think lightspeeds idea is the way to go with all switches in one spot if your looking to relocate them.

Hay maybe now youll have room for a coaktail holder up there

OZ You Can Do The Same On Your rig Its A Real Nice piece

Wrong boat.....................your thinking the BACARDI SPECIAL,