Twin Illmor Y2K
#31
VIP Member
VIP Member
I talked with Merc's Fusion boys in Miami (consumer motor referb division) and they are about to release a 383 motor that is very close to the same numbers as the Raylar motor. I do not remember the exact details, it was so new there was no price set at the time of the show.
They are taking the base 350 (I am assuming that is 5.0) boring and stroking it, doing a hand build up to what they referred to as a small block beast.
Was an interesting discussion and I got a little green man out of the deal.
They are taking the base 350 (I am assuming that is 5.0) boring and stroking it, doing a hand build up to what they referred to as a small block beast.
Was an interesting discussion and I got a little green man out of the deal.
To get 500+HP out of a 383 (6.2L) and be marine friendly would be tough. Unless, of corse, you bolt a blower on it. Merc Racing did build the 377 Scorpian for a while and I believe that was rated 350HP at the prop.
I have seen some nice 450HP 383 cube sbc marine engines offered by some builders.
This new Raylar is a 550HP 450cube (7.4L) small block...
__________________
Patrick
Patrick
#33
VIP Member
VIP Member
Join Date: Apr 2005
Location: Lehigh Valley, PA/1000 Islands
Posts: 286
Likes: 0
Received 2 Likes
on
2 Posts
I think they were blowing a little smoke T...
To get 500+HP out of a 383 (6.2L) and be marine friendly would be tough. Unless, of corse, you bolt a blower on it. Merc Racing did build the 377 Scorpian for a while and I believe that was rated 350HP at the prop.
I have seen some nice 450HP 383 cube sbc marine engines offered by some builders.
This new Raylar is a 550HP 450cube (7.4L) small block...
To get 500+HP out of a 383 (6.2L) and be marine friendly would be tough. Unless, of corse, you bolt a blower on it. Merc Racing did build the 377 Scorpian for a while and I believe that was rated 350HP at the prop.
I have seen some nice 450HP 383 cube sbc marine engines offered by some builders.
This new Raylar is a 550HP 450cube (7.4L) small block...