Offshoreonly.com

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   Superboat (https://www.offshoreonly.com/forums/superboat-44/)
-   -   MGD Performance (https://www.offshoreonly.com/forums/superboat/151912-mgd-performance.html)

FX10 03-01-2007 04:04 PM

Gave and Jason,
Hardware is on deck and so is the windscreen. Tomorrow the deck goes on the hull. I forgot my camera home today. I'll have piccs up tomorrow.

Rick

MDGperformance 03-01-2007 08:00 PM

Hey rick did john get gauges and harness installed,broke in engine today ,tommorrow will do some pulls and start tuning and tweaking,motor sounds awesome i think we should make around 800hp.

FX10 03-01-2007 08:25 PM

Dave,
Guages and Harness are not installed yet. If we have to wait for Coen to put them in, it will slow me down. He can install them once the deck is on.

MDGperformance 03-01-2007 09:06 PM

Rick,keep on rolling with it if john is too busy to rig gauges i will rig gauges at my shop ,not a problem.Just thought it would save time and effort to rig with deck off.

FASTERDAMITT 03-01-2007 09:09 PM

JC will fit just fine under the dash!:D Just glue it together Rick!

lightspeed 03-02-2007 06:09 AM

I Would Rather Rig The Boat With The Deck On ,,It Would Come Out Much Better ,,,

TeamSaris 03-02-2007 06:13 AM


Originally Posted by lightspeed (Post 2044101)
I Would Rather Rig The Boat With The Deck On ,,It Would Come Out Much Better ,,,

Out of curiosity why is that?
Thnaks, Johnny

FX10 03-02-2007 04:32 PM

Dave,
You'll be VERY happy with the progress on the boat today. Windscreen was installed on the deck. Deck was installed on the hull, PLUS !!! The bumprail is on !!! I have pictures, but my puter is having a brain fart and won't let me download them. So I'll bring the camera over to Kates with me and download them there. Wait till you see her !!! Looks like shes doin a hundred standin still !! I still have to glass the hull to the deck and the forward and midship bulkheads to the deck. She's getting there.
Figure around 8:00 for the pics. Have the popcorn ready. ;)

Rick

MDGperformance 03-02-2007 05:44 PM

2 Attachment(s)
rick,cannot wait to see pics ,Will have popcorn and beer ready,dyno tuned motor today came out great,made my goal 800hp @5900 around 750hp@5000 will work perfect with Konrad(still maintain outdrive warranty)The nice thing about this engine is idles great(hydraulic roller camshaft)sounds awesome at idle and makes great power without blower, intercooler,turbos etc.The motor runs on 93 octane and burns a lot less gas than similar supercharged package and is a lot more forgiving if bad fuel is run in it(ethanal fuel goes bad in about a month or so)

FX10 03-02-2007 06:28 PM

3 Attachment(s)
Here they are Dave !!!
First pics are of the deck , prior to putting the windscreen on. Then with windscreen and so on.


All times are GMT -5. The time now is 12:18 AM.


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.