Coen making the mounts

Seems that I would preffer flat of palm on flat of throttle and fingers to wrap around curved side in front

OK, livorsi delivers the throttle as in the picture and JC thinks that the way it was delivered is correct... The throttles look totally Reversable... I still think that the fingers should have the rounded grip side and the palm should have the flat side??? I have looked at about 30 boats with livorsi throttles and about 90% have it the way I would like them??? So anyone actually have the throttles???

Sorry wrong picture... The picture above was what I was imagining... Look at the way they are in the boat again...

When I Ordered Mine I Had Them Put The Throttle On The Other Side So Its Closer To You And The Shifter Wont Get In The Way When Your Throttling He Has Then Backwards

lightspeed, thanks for the input, JC has the throttle to the inboard like yours which is ok by me, but the blue knob itself I wanted to have facing the way that yours is... The blue knob with the hump facing forward and switch inboard for thumb... They do look reversable though... By the way I see your from babylon too, Do you have a picture of your boat to post probably see it around ???

Damn John !!! Did we get alot done today. Workin till 7:30 was a trip. Drives on sea strainer is ready to go in. Exhausts are done and the dash bulkheads are in Plus the motor mounts are done plus some misc. hoses and wires. Ya feel good, .... don't Ya !!!! ;)

PS Thanks Johnny (Lightspeed) for coming by and helping. Couldn't have done it without ya.

Glad To Come Down And Lend A Hand Anytime

It's great to here you boyz are working together again!