The Challnger resto begins...
#1
Driver-441
Racer
Thread Starter
The Challnger resto begins...
Did some work over the weekend.Got most of the boat stripped,gas tank ready to come out and 90? of the balsa out of the transom(that sucked).The last little bit of balsa is wet but not rotted, thats going to suck even more.Were going for a full plywood transom.Pics tonight.
#2
Registered
Platinum Member
Join Date: Aug 2004
Location: Toms River, N,J
Posts: 5,878
Likes: 0
Received 0 Likes
on
0 Posts
Did some work over the weekend.Got most of the boat stripped,gas tank ready to come out and 90? of the balsa out of the transom(that sucked).The last little bit of balsa is wet but not rotted, thats going to suck even more.Were going for a full plywood transom.Pics tonight.
#5
Registered
Platinum Member
Join Date: Aug 2004
Location: Toms River, N,J
Posts: 5,878
Likes: 0
Received 0 Likes
on
0 Posts
#7
Driver-441
Racer
Thread Starter
As you can see, I still have a chit load of work to do.We actually had to cut the outside half of the transom off to get to the balsa. Last shot is of the Avanti all put away.
#9
Registered
Yeah that tank looks like a PITA. Transom looks like a good amount of work too...luckily you have all winter.
I like that there is snow on the ground up there. Anything measurable, or was it just a dusting?
What sled is next to the Avanti?
I like that there is snow on the ground up there. Anything measurable, or was it just a dusting?
What sled is next to the Avanti?