Superboat Around the World(S.A.W.)
#192
Thread Starter
Registered

Joined: Jan 2008
Posts: 5,221
Likes: 620
From: Jersey Shore
I don't have any updates yet. I will be goin' by the factory this Thursday to get some pics and get a status. JC should've completed the interior by now...not sure though.
Question: the 34 has 400 gal of fuel. If I were to go with a pair of 300XS two strokes, how much oil should I be carrying on board to use up all of the 400 gal of fuel? Any idea?
Question: the 34 has 400 gal of fuel. If I were to go with a pair of 300XS two strokes, how much oil should I be carrying on board to use up all of the 400 gal of fuel? Any idea?
#194
Thread Starter
Registered

Joined: Jan 2008
Posts: 5,221
Likes: 620
From: Jersey Shore
Here are some updates: it looks like some hardware were installed...but not sure. JC and crew are concentrating on completing the 16 for some magazine tests. Will be awesome!! As soon as someone knows which magazine please let us know.
Here are some more pics:
Here are some more pics:
#199
Noli the 2 stroke rule of thumb is a gas/oil ratio of 50:1.....given your 400 gallon fuel capacity to run through that 400 gallons of fuel you will need roughly 8 gallons of oil Capacity....i think the Merc oil tanks are about 3 gallons each...i dunno if they make larger ones...
i think Verados are the way to go on that boat as they produce more real world Torque than the 300xs motors...
i think Verados are the way to go on that boat as they produce more real world Torque than the 300xs motors...
#200
Thread Starter
Registered

Joined: Jan 2008
Posts: 5,221
Likes: 620
From: Jersey Shore
It will splash hopefully in June. Just would like to see the 34 completed first before giving any dates. The interior is all that is needed. I was told that 2 weeks is all that is needed, but...
Rick, any updates to the 34 since I went there last week?
Rick, any updates to the 34 since I went there last week?


