Superboat Around the World(S.A.W.)
02-18-2011 | 07:58 AM
#493
Gold Member
Joined: Oct 2000
Posts: 5,664
Likes: 140
From: Hollywood, MD, USA
02-19-2011 | 08:24 PM
#494
Thread Starter
Registered
Joined: Jan 2008
Posts: 5,221
Likes: 620
From: Jersey Shore
For those who like to go speed boating in early spring and wants to keep their eyes and face from the blasts of cold air
Garth Marine Helmets:
http://www.murrays.com/mm5/merchant....Category_Code=
Garth Marine Helmets:
http://www.murrays.com/mm5/merchant....Category_Code=
02-25-2011 | 10:48 AM
#495
Thread Starter
Registered
Joined: Jan 2008
Posts: 5,221
Likes: 620
From: Jersey Shore
SAW is gettin' ready to be delivered to Daryll - DFI interiors
it's a good thing I kept the boxes.
gonna try to have the interior completed by Daryll
Ocean also threw on a couple engine covers for the Verado.
Weather proof on the outside...softie on the in
it's a good thing I kept the boxes.
gonna try to have the interior completed by Daryll
Ocean also threw on a couple engine covers for the Verado.
Weather proof on the outside...softie on the in
03-13-2011 | 03:09 PM
#497
Thread Starter
Registered
Joined: Jan 2008
Posts: 5,221
Likes: 620
From: Jersey Shore
Daryll has been busy with laying out the plastic for the gunwhale and the rear bench upholstery. I think this will be another exceptional work by Daryll.
Daryll's plan is to have the bolster upholstery made by PPI have the same look and feel as Daryll's work. The matching effort will go down to the details of vinyl colour and finish, piping locations, and foam firmness.
We'll be sending down white vinyl to PPI to have the Superboat logo be done by the same art studio as the ones made on the bolsters by PPI...again to have the same look and feel and make the whole interior upholstery to become harmonious ( had to look up this word
)
Daryll's plan is to have the bolster upholstery made by PPI have the same look and feel as Daryll's work. The matching effort will go down to the details of vinyl colour and finish, piping locations, and foam firmness.
We'll be sending down white vinyl to PPI to have the Superboat logo be done by the same art studio as the ones made on the bolsters by PPI...again to have the same look and feel and make the whole interior upholstery to become harmonious ( had to look up this word
)
03-21-2011 | 08:36 PM
#498
Thread Starter
Registered
Joined: Jan 2008
Posts: 5,221
Likes: 620
From: Jersey Shore
Starboard side Coaming pad
The area around the throttles have thin padding to allow for hand motion around the throttles and is silver carbon.
The dark semi circle towards the stern will match the leading edge of the rear bench
Daryll is all custom
The area around the throttles have thin padding to allow for hand motion around the throttles and is silver carbon.
The dark semi circle towards the stern will match the leading edge of the rear bench
Daryll is all custom
03-22-2011 | 08:23 AM
#500
Thread Starter
Registered
Joined: Jan 2008
Posts: 5,221
Likes: 620
From: Jersey Shore
When the interior is completed, SAW goes back to the factory to have the bolsters bolted down into the floor. Then she goes back to Ocean to have props made and to have the engines cranked for the first time...then it's fun in the sun!!!
...that's my plan if SAW doesn't get sold first...
...that's my plan if SAW doesn't get sold first...
