Offshoreonly.com

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   Superboat (https://www.offshoreonly.com/forums/superboat-44/)
-   -   Just Picked up a 16CC to go with my 21SB (https://www.offshoreonly.com/forums/superboat/195181-just-picked-up-16cc-go-my-21sb.html)

Stormrider 09-26-2008 08:17 AM

Yea... i guess my statement was a bit misleading...
To clarify...
did you have it done or did you buy it that way?
For a 21SB, its very tastefelly done...imo.

mragu 09-26-2008 10:42 AM


Originally Posted by Stormrider (Post 2698014)
Yea... i guess my statement was a bit misleading...
To clarify...
did you have it done or did you buy it that way?
For a 21SB, its very tastefelly done...imo.


No , I was a "general contractor" on the restoration.Raybo Marine did all the glass work, paint, etc, and East Coast Marine did the rigging.

THE HOSER 09-26-2008 01:20 PM

good looking 21 :party-smiley-004:
1) when are you selling it
2) and how fast is it :food-smiley-007:

mragu 09-26-2008 02:24 PM


Originally Posted by THE HOSER (Post 2698381)
good looking 21 :party-smiley-004:
1) when are you selling it
2) and how fast is it :food-smiley-007:

1st-Put in your avatar that you have a 24' 4Winns and not a SB21.
That spot is for people who USE their boats
2nd-The motor is sold. If I find a perfect 24 with the right I/O power I may sell the 21
3rd-Right now it is not very fast as I cannot use it because of my back, you can't use your because of your BOSS (LOL)
The best speed so far was 74.8 on legit GPS. It is nowhere near being set up properly as I have not been able to use the boat for 2 mos and I have only been out on it 5X

mragu 01-30-2009 01:05 AM

16CC All Redone and Ready 4 Rigging
 
All painted, Had knees installed and no tie bars needed now. Should be done with rigging by mid-Feb
http://i43.tinypic.com/2v0iqfk.jpg

http://i42.tinypic.com/15f3t6r.jpg

Sean 01-30-2009 09:22 AM

Looks sweet mike

mragu 01-30-2009 11:09 AM


Originally Posted by Sean (Post 2789250)
Looks sweet mike

Thanks!
I also added an underfloor gas tank to allow space under the console. The plywood floor was replaced with a nidacore floor which has lightened the boat considerably. I hit 49 on GPS with myself(215lbs) and 1 passenger(200?) with the 90HP Tohatsu. I am interested in seeing what the boat does with the V-4 Crossflow that I am putting on it

Sean 01-30-2009 01:33 PM

mine had a 2003 115 Johnnyrude on it and it was scary....:eek::eek::eek: never attempted to see how fast it was...couldnt get through the chine walk... my nads are smaller than they used to be in my yute... I had a 235 johnson on a 16 Traveler....

FX10 01-30-2009 03:19 PM


Originally Posted by mragu (Post 2695990)
rick, thanks
sean, i almost bought yours when you had it for sale, i delayed in calling then i saw it at robs yard. this was was a little cheaper and with a motor. yours was/i very sharp and a nice resto.

i may need a 24 standup as i have major issues with my back and have not used the 21 in almost 2 mos. my chiropractor is my neighbor and he tells me he better not see that boat off the trailer.

I'm thinking of a 24 with a Millenium setup. Sitdown down console. I'm getting old too.

mragu 01-30-2009 03:49 PM


Originally Posted by FX10 (Post 2789500)
I'm thinking of a 24 with a Millenium setup. Sitdown down console. I'm getting old too.

With a PAD, dammit


All times are GMT -5. The time now is 08:27 PM.


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.