I told my wife that the SBTV is not broken, it's supposed to have only 1 channel :



..... "The RicksChannel"

One of the best parts of this is getting the updates every day. I talked to Rick this morning and was telling him I was excited to see the transom....five minutes later, I had 5 pics on my cell phone.

Rick....you da man:coolcowboy:

With this ugly Sat. I thought Rick would be broadcasting live Superboat Land TV Photo builds !!!!

Aquamarine had the 30 CC at the Tobay boat show today, boat looked great. Weather wound up holding out, no big rain

Tobay was slow overall though, much smaller then usual

So I guess Uncle Rick took the day.................. I want my Superboat TV.:grinser010:

"I want my MTV" is so yesteryear.

Today kids are saying: "I want my SBTV"

What happened to Superboat TV today anyways :)

...

the transom about to be glassed in

I had decided to go with a small splash well type set up as opposed to a full transom. The transom was cut assuming motors would be mounted directly to the transom.

This required a height increase of about 2-3 inches above were the lowest part of the transom was on the current models built, (assuming a 20'' mid section on the motors).

JC also decided not to have a notch in the transom, just flat straight across. So in effect, you have as close to a full transom as you can, but still can mount engines directly to the transom if you want, or jack them back if you want, so best of both worlds I guess

The last picture is what the current transom cut out looks like on the current existing model, so imagine it coming up about 3 inches from the bottom part of the notch (that notch is like 6 inches in total)

Good idea with the higher transom, coens boat sits very low to the water.