Go Back  Offshoreonly.com > Owners Forum > Superboat
OK, 5 blade is here!!! >

OK, 5 blade is here!!!

Notices

OK, 5 blade is here!!!

Old 05-16-2010 | 06:28 PM
  #21  
AIR TIME's Avatar
Registered
20 Year Member
 
Joined: Dec 2000
Posts: 6,283
Likes: 1
From: EASTON MA.
Default

Originally Posted by Pure Energy
Hey Pat!! I took off the 1 1/2" spacer I had on it because the handling suffered. The boat really felt stuck to the water, kind of like the bottom was covered with barnacles!! I also switched to an Imco lower. Boat handled and felt better, but no speed gain. I may try the spacer again, but I'm getting tired of chasing speed numbers. 84 is very fast and certainly fun!!
what about having brett lab it for you maybe the dia is to large I have heard of guys having brett take a little out of the max and px5 props .I can't wait to try my px5 30 this summer. good luck
AIR TIME is offline  
Reply
Old 05-17-2010 | 07:43 AM
  #22  
Pat McPherson's Avatar
VIP Member
 
Joined: Oct 2002
Posts: 5,246
Likes: 3
From: Ivoryton, CT
Default

Originally Posted by z.zuperboat
Did someone say greenport !!
I did...
My boat is running and at the marina.
Test ride yesterday went well.
I'm ready when you guys are.
__________________
Patrick
Pat McPherson is offline  
Reply
Old 05-18-2010 | 07:29 PM
  #23  
ChristianGott's Avatar
Platinum Member
25 Year Member
Platinum Member
 
Joined: Nov 2000
Posts: 1,420
Likes: 33
From: Connecticut
Default

hey pat...
glad to hear you're still boating...thought you were thinking of getting out..how's the boat running? quick q, with all your knowledge...got any great ideas on how to yank a gimbal bearing that's stuck in the housing?
tx,see you out there
c
ChristianGott is offline  
Reply
Old 05-19-2010 | 07:51 AM
  #24  
Pat McPherson's Avatar
VIP Member
 
Joined: Oct 2002
Posts: 5,246
Likes: 3
From: Ivoryton, CT
Default

Originally Posted by ChristianGott
hey pat...
glad to hear you're still boating...thought you were thinking of getting out..how's the boat running? quick q, with all your knowledge...got any great ideas on how to yank a gimbal bearing that's stuck in the housing?
tx,see you out there
c
Hi Chris,
Yes, I did have my boat for sale last Fall. No, not getting out of boating. Just looking to down size. We'll see how this season goes.
Chris you need to make a big slide hammer out of a piece of threaded rod. Try to get a big washer and nut inboard of the bearing and have at it.
Sorry to reply on your thread K.
Chris shoot me a PM or give a call if you need more.
Patrick
__________________
Patrick
Pat McPherson is offline  
Reply
Old 05-25-2010 | 08:02 PM
  #25  
JCPERF's Avatar
Registered
20 Year Member
 
Joined: Jul 2004
Posts: 8,908
Likes: 9
From: Long Island,New York
Default

Originally Posted by Pure Energy
Hey Pat!! I took off the 1 1/2" spacer I had on it because the handling suffered. The boat really felt stuck to the water, kind of like the bottom was covered with barnacles!! I also switched to an Imco lower. Boat handled and felt better, but no speed gain. I may try the spacer again, but I'm getting tired of chasing speed numbers. 84 is very fast and certainly fun!!
Hey Kendall give a shout out from time to time
JCPERF is offline  
Reply

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service

Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.