Offshoreonly.com

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   Superboat (https://www.offshoreonly.com/forums/superboat-44/)
-   -   21 Build ??????? (https://www.offshoreonly.com/forums/superboat/276670-21-build.html)

OCCJoe 05-17-2012 05:03 PM

21 Build ???????
 
4 Attachment(s)
The forum has been a little dead lately so here's a little build I've been working on . Used to be a factory Merc sponsored boat with a 300 on it . I was told it ran in the 90's .
The deck was removed and a one off custom deck was built . Looks like it was splashed off a little Scarab . Should be a fun boat ..........

OCCJoe 05-17-2012 05:08 PM

4 Attachment(s)
We cut out the console and seat , Filled some holes in the floor , and cut pull up cleats and a new fuel fill . Gotta love those late nite's !

OCCJoe 05-17-2012 05:14 PM

5 Attachment(s)
Deck was finished in Base/Coat Clear/Coat and the floor was done in white gel coat , NO NON SKID , better have you sparry's on or your going for a ride but it should be easy to clean !

budd 05-18-2012 05:46 PM

That's gonna be awesome

ndaniels 05-20-2012 09:39 AM

Looks good. Should be a fun boat when its all done.

Looking foreward to watching the progress.

OCCJoe 05-20-2012 07:34 PM

1 Attachment(s)
Picked up 3 250 EFI merc's today ! What do I Do ? I don't think there's room on the transom for all three !!!!!

noli 05-21-2012 08:07 AM

.




where did you get them?

are there any more available?




.

Dave M 05-21-2012 08:08 AM

Looks good!

OCCJoe 05-21-2012 12:20 PM


Originally Posted by noli (Post 3692106)
.
where did you get them?
are there any more available?

Noli I lucked up and found them on craigs list . They were within an hours drive and the primary motor only has 275 hours on it . Two run and have killer compression across the board and one is a parts motor

rchevelle71 05-21-2012 12:49 PM


Originally Posted by OCCJoe (Post 3692351)
Noli I lucked up and found them on craigs list . They were within an hours drive and the primary motor only has 275 hours on it . Two run and have killer compression across the board and one is a parts motor

Whaddaya wanna sell off that parts motor?

OCCJoe 05-31-2012 06:56 PM

5 Attachment(s)
Then we moved to the hull !

OCCJoe 05-31-2012 07:00 PM

5 Attachment(s)
And finally the boat is all white !

noli 05-31-2012 07:07 PM

.



Wow!

What a transformation!




.

FX10 06-01-2012 05:13 AM

Nice job Joe. I know you already gelcoated the cockpit. But if you want a little non skid. Lightly sand the gelcoat. get some Interlux Polymeric Non Skid compound and mix it with gelcoat. Works great.

cdail28590 06-01-2012 10:00 AM

I assume with the way the deck is made you are going to make it a center console or was it originally a center console? In 1 pic it looks like a small console there but not for sure.

OCCJoe 06-01-2012 02:18 PM


Originally Posted by cdail28590 (Post 3700204)
I assume with the way the deck is made you are going to make it a center console or was it originally a center console? In 1 pic it looks like a small console there but not for sure.

It was a single sit down with a small console that you legs in , kept the CG low . However I'm doing a CC and a leaning post . Should be scary as hell doing 85 on a leaning post .

OCCJoe 06-26-2012 12:43 PM

2 Attachment(s)
Motor bracket came in and the rigging begins ! Gonna try and have it done by the 7th . If I make it happen it will be fourteen weeks from the day I bought it to the day it splashes .

scarab63 06-28-2012 05:04 PM

Your wife must either really love you, or really hate you.
Looks nice.
Make it a stand up like u plan & itll be a hot seller as a flats boat.

OCCJoe 06-28-2012 06:49 PM

Mike the craziest thing is that this is the third boat we've done sense you picked yours up .

OCCJoe 07-27-2012 12:14 AM

4 Attachment(s)
Console mock up !

OCCJoe 07-27-2012 12:22 AM

3 Attachment(s)
little

OCCJoe 07-27-2012 12:27 AM

8 Attachment(s)
Insanity is the place I live in !

noli 07-27-2012 04:58 AM

.

wow I luv the way this is coming out

I really like painted cowlings...will the cowling receive clear coat ?



.

OCCJoe 07-27-2012 10:16 PM

3 Attachment(s)
Noli you must have an 80" computer monitor because you notice the funniest little details ..... I finished the base at 11:30 last nite and shot the clear today ! And yes that is orange peal from the ton of clear I dumped on this thing so I can buff it out and not feel any Paint lines .

noli 07-30-2012 08:47 PM

.

my MacBook Pro has super sharp images :)


looking great Joe, awesome paint job!

would luv to see the rig in sunlight, that cowling's gonna be gleaming!

.

OCCJoe 07-31-2012 09:37 AM

4 Attachment(s)
Noli we don't need Any sunlight ! Lol !

scarab63 08-07-2012 10:12 AM

Water test?
Mph? Ride ?

OCCJoe 08-12-2012 10:44 AM

5 Attachment(s)
Took it out for the first time , unfortunately it was dark out already however it worked out great because the ramp empty and it gave me an opportunity to adjust the trailer without being in anybody's way .... The boat is a little dream , I set it up exactly like other 21's that had 85mph success with 250 merc's . However I didn't count one one thing , This boat is five hundred pounds lighter then all the others . Coming in at two thousand pounds fully rigged , you can see how high it sits in the water and my prejack is a little ambitious ... I didn't get a chance to open it up yet , and even though it's bad a$s to shoot a giant rooster tail at 30mph i'm gonna lower the motor down one notch . Gonna drop it and run it again today . rain days make great set up days !

scarab63 08-12-2012 01:52 PM

Led lookin good.
What brand?

OCCJoe 08-26-2012 09:56 PM

5 Attachment(s)
Well I've handed it over to it's new owner ! Five night time test and tunes and this is it's first daylight run !

OCCJoe 08-26-2012 09:59 PM

5 Attachment(s)
A few more !

scarab63 08-27-2012 11:06 AM

No #s? :-(

FX10 08-28-2012 05:40 PM

Looks great Joe!

Kevindw 12-04-2012 03:03 PM

Holy shnike's I want. I want. I WANT!!!!!!!

OCCJoe 12-04-2012 03:53 PM


Originally Posted by Kevindw (Post 3826290)
Holy shnike's I want. I want. I WANT!!!!!!!

We'll be happy to build one for you !

Kevindw 12-06-2012 02:16 PM

Joe
Are you building Superboat cc's out of NC now???? Or rebuilding ones you can find??? I talked to cohen about a new one yesterday. Wasn't super impressed with the options...

Kevindw 12-06-2012 02:35 PM

I should say;all over the place on pricing and power and rigging options...

OCCJoe 12-06-2012 05:27 PM

We've been buying 21's and rebuilding them . The 21 Super , Challenger , Paramount , Concept , and Olimpia are pretty much all the same boat . All I need is a budget you would like to stay in and I can build a boat to your liking . We can do computer rendering of what the finished boat would look like .
The new boat would be nice but would cost twice as much and I know Coen has at least four boats that he's been trying to finish for more then a year and a half .
So if you do get a new one, don't put more then a third down and get a financial compensation in writing with a guaranteed finish date ... AND BEFORE ANYONE SAYS I'M BASHING SUPERBOAT , This goes for all boat builders including myself !!!!

Kevindw 12-06-2012 07:00 PM

Interesting...

IRONMAN 04-15-2013 09:15 PM

Nice work.
Is it self bailing since it floats high enough?


All times are GMT -5. The time now is 08:27 AM.


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.