30’ Tempest - Freeze Frame
#71
Gold Member
Gold Member
Thread Starter
We will be reinstalling all the original bracing back into the boat. We’ve only made it stronger with the addition of the aluminum plate inside….boat already had a aluminum plate on the outside of the transom.
The following 2 users liked this post by badmonkey:
outta control (07-17-2023), speicher lane (07-17-2023)
The following users liked this post:
badmonkey (07-17-2023)
#73
Gold Member
Gold Member
Thread Starter
Engines are hung and even got the cowlings polished and ceramic coated. Now the fun begins with rigging and redoing the dash, then painting the deck…making headway!!!
The following 9 users liked this post by badmonkey:
Dave M (07-19-2023), floatingphil (07-20-2023), outta control (07-19-2023), rak rua (07-19-2023), RSCHAP1 (07-19-2023), scippy (07-19-2023), sonicss42 (07-19-2023), TomZ (07-28-2023), Twin O/B Sonic (03-09-2024)
The following users liked this post:
badmonkey (07-20-2023)
#76
Gold Member
Gold Member
Thread Starter
#77
Gold Member
Gold Member
Thread Starter
Getting the dash started for complete redo…lots of filling and glassing to come…then new vessel view screen with new gauges….more photos to come.
#78
Registered
Man, did this project escalate. I know it will be top notch when completed. Hope to see you in December at Toys.
The following users liked this post:
Twin O/B Sonic (03-09-2024)
#79
Gold Member
Gold Member
Thread Starter
The following users liked this post:
sonicss42 (08-20-2023)
#80
Gold Member
Gold Member
Thread Starter
Dash is beginning to get ready for new gauges and screens
Bilge is painted and ready for rigging
Example of the new rub rail to be installed
The original teak accents and cabin door are getting refinished
The following users liked this post:
sonicss42 (08-20-2023)