Show us your rigging!
Show us your rigging!
Gold Member
03-02-2004, 09:09 AM
#5
VIP Member
VIP Member
I would show you mine, but vary little is the way she came from the factory...
In fact, I have a Volvo Penta engine hooked to a Merc Bravo drive.
As for the wiring, I would be embarrassed to show after all the crap I've added...
In fact, I have a Volvo Penta engine hooked to a Merc Bravo drive.
As for the wiring, I would be embarrassed to show after all the crap I've added...
__________________
Patrick
Patrick
03-05-2004, 08:55 AM
#7
Registered
Join Date: Jun 2003
Location: PCNY
Posts: 197
Likes: 0
Received 0 Likes
on
0 Posts
Motor...
The Stern is set up just like Dave's minus the cool platform. (Hmm??)
Since I wont be selling her this season, this pic will be changing drastically in the next couple of months..
The Stern is set up just like Dave's minus the cool platform. (Hmm??)
Since I wont be selling her this season, this pic will be changing drastically in the next couple of months..
03-05-2004, 03:18 PM
#8
VIP Member
VIP Member
Sean, Those CMIs look awesome! Did you gain anything?
Engine access and the way the helm area are two of the three reasons I prefer my 24' Superboat over my 24' Pantera. The third being the cabin area...
Engine access and the way the helm area are two of the three reasons I prefer my 24' Superboat over my 24' Pantera. The third being the cabin area...
__________________
Patrick
Patrick
Last edited by Pat McPherson; 03-05-2004 at 03:24 PM.
03-06-2004, 08:45 AM
#9
Registered
Join Date: Jun 2003
Location: PCNY
Posts: 197
Likes: 0
Received 0 Likes
on
0 Posts
Thanks Pat...
I gained a little speed, about 1 - 2 mph. The big gains are on constant tempature that I have now, I run all day and the gauge doesn't move. Surprisingly there not much louder than the stock exhaust .
-Sean
I gained a little speed, about 1 - 2 mph. The big gains are on constant tempature that I have now, I run all day and the gauge doesn't move. Surprisingly there not much louder than the stock exhaust .
-Sean
