Broke My Boat Again
#12
Registered

Joined: Feb 2003
Posts: 1,661
Likes: 29
From: BABYLON NY
Well Im Not The Only One With Problems.none With Superboat Just Mercury.dammm Pat You Work Fast.i Should Have Paid You To Mine Together .what Actually Broke Has To Be The Gimble Correct?then Did It Take Out The Drive?any Way Im In The Water.still Dont Own A Prop But Had Some To Test.lets See So Far Only Had A New Thermostat Go Bad,oil Pressure Wire Break Off,and Waterhose Leak.not Bad For Working With A Drop Light In The Dark.otherwise Good To Go.i Know I Will See You Sat.
#13
DOH!! .... I Hope your up and ready in time.
However, I too belong on this post...I ran great all weekend, Except for the final ride in..Half way in she cuts off like I turned the key off...Had to get towed in blah blah blah... Turns out the "new" fuel pump took a crap on me..
However, I too belong on this post...I ran great all weekend, Except for the final ride in..Half way in she cuts off like I turned the key off...Had to get towed in blah blah blah... Turns out the "new" fuel pump took a crap on me..
#14
Had today off from work. Boat this morning, Family this afternoon.
Engine is back in and running. Drive comes in tomorrow. We should be ready for Saturday with time to spare.
ZZ, the gimble and drive both broke. The bottom half of the drive looks fine.
Dutra, didn't you just change the fuel pump? Low or High pressure?
Engine is back in and running. Drive comes in tomorrow. We should be ready for Saturday with time to spare.
ZZ, the gimble and drive both broke. The bottom half of the drive looks fine.
Dutra, didn't you just change the fuel pump? Low or High pressure?
__________________
Patrick
Patrick
Last edited by Pat McPherson; 07-06-2004 at 09:10 PM.
#15
New gimble installed, engine back in, and I even got a check from the insurance guy today.
One item left; drive should be in tomorrow...
One item left; drive should be in tomorrow...
__________________
Patrick
Patrick
#17
Damn Pat, Were you nascar pit crew at one time?...
Yeah that was a new fuel pump "factory defect" (no pressure!). My man hooked me up with a new one..No charge, I'm back running.. Just a little leary now. Good luck with OD today...
Yeah that was a new fuel pump "factory defect" (no pressure!). My man hooked me up with a new one..No charge, I'm back running.. Just a little leary now. Good luck with OD today...
#19
I have gotten too good at this...
One thing I will say, this 24' SB is the easiest boat I have ever worked on. Big thumbs up for JC's engine hatch design.
Hey Superbash,
Had not seen many post from you lately, busy boating I hope.
Dutrasystem,
Glad to hear your up and running. Meeting us Saturday?
SB30,
Claudio's wants us there at 11:30.
I would say that we should be ready to roll around 10am.
One thing I will say, this 24' SB is the easiest boat I have ever worked on. Big thumbs up for JC's engine hatch design.
Hey Superbash,
Had not seen many post from you lately, busy boating I hope.
Dutrasystem,
Glad to hear your up and running. Meeting us Saturday?
SB30,
Claudio's wants us there at 11:30.
I would say that we should be ready to roll around 10am.
__________________
Patrick
Patrick
#20
Registered
Joined: May 2003
Posts: 50
Likes: 0
From: Douglas, MA
Pat,
Ok, 10am it is at the Old Saybrook ramp. I'll be in the water waiting. I am assuming you are comming from up river and will swing in to pick up those of us who will be putting in at Old Saybrook. Looking forward to meeting you and the other superboat folks.
SB30
Ok, 10am it is at the Old Saybrook ramp. I'll be in the water waiting. I am assuming you are comming from up river and will swing in to pick up those of us who will be putting in at Old Saybrook. Looking forward to meeting you and the other superboat folks.
SB30


